http://wiki.openvz.org

http://wiki.centos.org/HowTos/Virtualization/OpenVZ

OpenVZ is a form of OS virtualization based on 'containers'.

Other common forms of operating system virtualization:

• Fully virtualized
  • Often called HVM (hardware virtual machine)
  • VMware, KVM, etc.
• Para-Virtualized
  • Xen

OpenVZ containers offer a very high performance virtualization platform. This is primarily due to its low overhead. Containers share the common host kernel and is primarily for Linux VMs.

See Proxmox.

See OpenVZ Web Panel.

http://tutorialsbay.com/how-to-isntall-asterisk-freepbx-on-a-vps/

See PiaF.

http://pve.proxmox.com/wiki/PBX_in_a_Flash

http://www.pbxinaflash.com/community/index.php?threads/best-timing-source.9084/

http://www.cadvision.com/blanchas/Asterisk/ZaptelPerformanceTesting.html

We run the firewall on the Host Node (HN).

Stop all running VMs.

sed -i 's|ipt_REJECT ipt_tos ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length|ipt_REJECT ipt_tos ipt_TOS ipt_LOG ip_conntrack ipt_limit ipt_multiport iptable_filter iptable_mangle ipt_TCPMSS ipt_tcpmss ipt_ttl ipt_length ipt_state iptable_nat ip_nat_ftp|' /etc/vz/vz.conf

/etc/init.d/vz restart

Sangoma USB hardware timing source (internal UT50 and external UT51):

http://sangoma.com/products/accessories/tools.html

Note that DAHDI will only work if the Host Node and the VE are the same $ARCH (32/32 or 64/64).

HPET or hardware timing source is important.

Is HN kernel compiled with HPET and am I using it?

grep HPET /boot/config-2.6.32-11-pve

cat /sys/devices/system/clocksource/clocksource0/available_clocksource

cat /sys/devices/system/clocksource/clocksource0/current_clocksource

Change the current clock source, test then add to rc.local:

echo hpet > /sys/devices/system/clocksource/clocksource0/current_clocksource

See also 'res_timing_timerfd'.

dmesg | grep dahdi

dahdi_test

Acceptable score: >99.975

This assumes Asterisk is running as the user 'asterisk'.

CTID=100
vzctl stop $CTID
vzctl set $CTID --devnodes dahdi/pseudo:rw --save
vzctl start $CTID
vzctl exec $CTID chown -R asterisk.asterisk /dev/dahdi /lib/udev/devices/dahdi

You can export devices from the Hardware Node (HN) to the container (CT) by using the devnodes flag.

You may need a line like this in the /etc/vz/conf/VEID.conf for the Asterisk VE:

DEVNODES="dahdi/pseudo:rw dahdi/ctl:rw dahdi/channel:rw dahdi/timer:rw "

OpenVZ containers are created from templates. Since containers are not fully virtualized environments. There is no booting to CD/DVD drives or ISO images.

http://wiki.openvz.org/Physical_to_container

http://www.powerpbx.org/content/are-you-sure-you-want-revert-revision-sat-12102011-1203

http://wiki.openvz.org/Creating_a_CentOS_5.0_Template

1. Install your Centos server and application to a physical machine.
2. Create a Centos 5 container using an existing Centos template and shut it down.

Clean out the YUM database and stop running applications:

yum clean all

amportal stop
service dnsmasq stop
service httpd stop
service mysqld stop

CTID=100

rm -rf /var/lib/vz/private/$CTID

mkdir /var/lib/vz/private/$CTID

rsync -arvpz --exclude=/dev --exclude=/mnt --exclude=/proc --exclude=/sys --exclude=/tmp \
-e ssh root@xx.xx.xx.xx:/ /var/lib/vz/private/$CTID/

sed -i -e 's/^[0-9].*getty.*tty/#&/g' /var/lib/vz/private/$CTID/etc/inittab

grep devpts /var/lib/vz/private/$CTID/etc/fstab > /var/lib/vz/private/$CTID/etc/fstab.new

mv -f /var/lib/vz/private/$CTID/etc/fstab.new /var/lib/vz/private/$CTID/etc/fstab

mkdir /var/lib/vz/private/$CTID/dev
mkdir /var/lib/vz/private/$CTID/mnt
mkdir /var/lib/vz/private/$CTID/proc
mkdir /var/lib/vz/private/$CTID/sys
mkdir /var/lib/vz/private/$CTID/tmp

mkdir /var/lib/vz/private/$CTID/dev/pts

mkdir /var/lib/vz/private/$CTID/etc/udev/devices

cd /var/lib/vz/private/$CTID

chroot .

MAKEDEV -d /dev -x {p,t}ty{a,p}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} console core full kmem kmsg mem null \
port ptmx random urandom zero ram0

MAKEDEV -d /etc/udev/devices -x {p,t}ty{a,p}{0,1,2,3,4,5,6,7,8,9,a,b,c,d,e,f} console core full kmem \
kmsg mem null port ptmx random urandom zero ram0

chmod 1777 /tmp
chmod 1777 /var/tmp

# Disable any physical NICs by modifying the etc/sysconfig/network-scripts/ifcfg-ethX files
# (where X is the interface number starting from 0) and setting ONBOOT to no.

vi /etc/sysconfig/network-scripts/ifcfg-eth0

ONBOOT=no

vi /etc/sysconfig/network

NETWORKING_IPV6="no"

vim /etc/rc.d/rc.sysinit

#/sbin/start_udev

vi /etc/sysconfig/init

PROMPT=no

vi /etc/sysconfig/selinux

SELINUX=disabled

# For RHEL 6 and clone distributions, you must comment out "console" in /vz/private/$CTID/etc/init/rc.conf
# and /vz/private/$CTID/etc/init/rcS.conf.
#
# You must also delete or rename tty.conf and start-ttys.conf.
#
# If you do not the container will not boot up.

cat << EOF >> /etc/yum.repos.d/vz.repo
[vz-base]
name=vz-base
mirrorlist=http://vzdownload.swsoft.com/download/mirrors/redhat-el5
#mirrorlist=http://vzdownload.swsoft.com/download/mirrors/redhat-el6
gpgcheck=0 

[vz-updates]
name=vz-updates
mirrorlist=http://vzdownload.swsoft.com/download/mirrors/updates-released-rhel5
#mirrorlist=http://vzdownload.swsoft.com/download/mirrors/updates-released-rhel6
gpgcheck=0
EOF

cat >> ~/.bash_profile << EOF

alias ll='ls -l'
alias la='ls -A'
alias l='ls -CF'
alias ls="BLOCK_SIZE=\'1 ls --color=auto"
alias free="free -m"
export GREP_OPTIONS='--color=auto'
PS1='\[\033[00;36m\]\u\[\033[00m\]@\h:\[\033[05;33m\]\w\[\033[00m\] \$ '
export HISTCONTROL=ignoredups
EOF

mkdir /var/lock/rpm

echo "
# IPv6
blacklist ipv6
blacklist net-pf-10" >> /etc/modprobe.d/blacklist.conf


exit # from chroot


vzctl start $CTID
vzctl enter $CTID

# For services info, see http://wiki.openvz.org/Physical_to_container

chkconfig --list | grep :on

for i in acpid apmd auditd bluetooth clock cupsd consolefont cpuspeed dnsmasq gpm hdparm iptables ip6tables isdn \
irqbalance kudzu lm_sensors lvm2-monitor mcstrans mdmonitor microcode_ctl netfs netplugd smartd netfs nfslock ntpd \
openibd pcmcia portmap postfix restorecond rpcidmapd rpcgssd sendmail wanrouter xfs; do chkconfig $i off; done

Using tar instead of rsync:

vim /etc/exclude

.bash_history 
lost+found 
/dev/* 
/mnt/* 
/tmp/* 
/proc/* 
/sys/* 
/usr/src/*

tar --numeric-owner -czvf /tmp/centos-5.0-x86_64-FreePBX-image.tar.gz -X /tmp/exclude /

scp /tmp/centos-5.0-x86_64-FreePBX-image.tar.gz root@192.168.1.30:/var/lib/vz/template/cache/