Virtual Architects Support Wiki

http://support.netgear.com/product/DGN2200v3

http://docs.netgear.com/dgn2200v3/enu/202-10870-01/

Default Login: admin Password: password

Default Wireless Key is on the bottom of the unit.

Skip the “NetGear Genie” and configure manually.

Under “Basic Settings” Tick “Requires Login” and input credentials.

Under “DSL Settings” change VCI to 0 and VPI to 32

Under “Advanced” “Port Forwarding/Port Triggering” click “Add”. Select the service and input IP address of target device.

There is an extensive list of pre-set ports but SSL port 443 is not one of them. To forward 443 (or any port not listed) you must create the service first.

You create this under “Security” “Firewall Rules”. Use appropriate name, select UDP, TCP or UDP/TCP and Port number(s). After you save that info that service will appear at the top of the list on the “Port Forwarding/Port Triggering” list of services.