Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== How to Configure a Remote Parallels RAS Client ======

===== Available RAS Clients =====

Parallels/2X RAS Client software is available for **many different devices** including:

  * iOS
  * Android
  * Windows Phone
  * Mac
  * Windows
  * Linux
  * Chrome
  * Raspberry Pi

http://www.parallels.com/products/ras/download/links/

:!: Most newer PCs have **64-bit** Windows installed, but you should download the version that matches your PC.

{{ :quick_guide:2x_ras_client_download.png?650 |Download 64-bit RAS Client}}

===== Preparation =====

Before starting, you will need:

  - Get the **Remote Desktop Gateway hostname or IP address**
    * From your Parallels/2X administrator
  - Determine if your computer is **32-bit or 64-bit**
    * **Windows -> Control Panel -> System**
  - **Download** the Parallels/2X Client installer
    * Choose 32-bit or 64-bit to match your PC architecture
  - **Install the Parallels/2X Client software** onto your PC
    * Requires administrator permissions/credentials

:!: If asked, **do not install the single sign-on component**.

===== Configuration =====

:!: This will create a **secure, encrypted connection** to your remote desktop.

:!: Many smaller customers will use a **self-signed SSL certificate**, which is free.  If your company uses a self-signed cert, **you must accept it permanently**.

This example shows a remote Windows PC being configured for secure access to a 2X Remote Desktop, but **other 2X Clients are similar**.

  - Start the Parallels/2X Client
    * Double-click the "Parallels Client" icon or open the System Tray applet
  - Click **File -> Add New Connection**
  - Choose **Parallels Remote Application Server**
  - For **Server**, enter your Secure Remote Gateway host name
    * Probably something like ''remote.yourdomain.com''
  - For **Connection Mode**, select ''Gateway SSL Mode''
    * SSL is encryption
  - Enter an **alias** (name) for this connection
    * Just a short name to differentiate between multiple connection profiles
  - Click ''OK''
  - Enter your Parallels/2X Remote Desktop **Username** (or ''username@2XDomain'')
  - Enter your Parallels/2X Remote Desktop **Password**
  - Select **Save Password**
  - Click ''Connect''
  - If you see a Security Alert prompt, accept the self-signed SSL certificate
    * Check the box for **Do not ask me again**
  
:!: Most other settings will be configured by your 2X administrator via policy settings.

:!: From this screen, you can right-click published apps or desktops and create **shortcuts** on your remote PC desktop.

{{ :quick_guide:2x_client.png?650 |2X Client}}

{{ :quick_guide:2x_client_file_add_new_connection.png?300 | Add Connection}}

{{ :quick_guide:2x_client_connection_properties.png?350 | Connection Properties}}

{{ :quick_guide:2x_client_connection_credentials.png?350 | User Credentials}}

{{ :quick_guide:2x_client_connected.png?650 | Connected}}

{{ :quick_guide:2x_client_ssl_self_signed.png?350 | Accept Self-Signed SSL Certificate}}

===== Multiple Connection Profiles =====

There are times when you may want to create more than one RAS connection profile.  For example, on a portable computer, you may want to create "Remote" and "Local" connection profiles.

For a **remote connection**, use the **external** server name you were given by your Parallels RAS administrator, possibly like ''remote.yourdomain.com''.  You  will need to select ''Gateway SSL Mode'' for the **connection mode**.

For **local connections**, use the **internal** server name you normally use when in the office (or the IP address) with ''Direct Mode'' as the **connection mode** (because ''Direct Mode'' has slightly less overhead than the encrypted ''Gateway SSL Mode'').

An edge router does different things depending on which interface traffic appears on.  For example, using the external host name (i.e. ''remote.yourdomain.com''), a DNS query will return your external public IP address and traffic coming into the router from the Internet is forwarded in to your server.  However, traffic hitting the router from inside the firewall is treated differently (no port forwarding).

This is the basic purpose of having multiple connection profiles in the Parallels client...to connect to multiple Parallels RAS farms, or to connect a single farm with different connection settings.

===== Adobe Acrobat =====

If you have problems opening PDFs from a USB flash drive in a RAS session, try this:

**Adobe Reader -> Edit -> Preferences -> Security Enhanced -> uncheck 'Enable Protected Mode at Startup'**

Click OK and restart Adobe Reader.
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
