Differences

This shows you the differences between two versions of the page.

--- networking:switch:dell_8024 [2019/12/20 10:25]
gcooper
+++ networking:switch:dell_8024 [2021/12/20 10:33] (current)
gcooper
@@ Line 4: / Line 4: @@
 http://en.community.dell.com/techcenter/networking/w/wiki/2585.creating-vlans-on-a-dell-powerconnect-8024.aspx
+**User Guide**: https://downloads.dell.com/manuals/common/powerconnect_8024-and-f-ug_en-us.pdf
 Getting Started Guide: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-8024_Setup%20Guide_en-us.pdf
@@ Line 17: / Line 19: @@
 ===== Replacement Fan =====
-**Fan Only**: (unobtanium) Delta FFB0412SHN-9S93 (40x40x28mm, 3-pin, 13K RPM, wired red-blue-black from pin marked 1)
+<note warning>This fan must be re-pinned before applying power or the **fan will be damaged**!</note>
-FIXME FFB0412SHN-F00 fans are commonly available, but they are wired black-red-blue from pin marked 1 and must be rewired.
+**Delta FFB0412SHN-F00**
+  * 40x40x28mm
+  * 3-pin
+  * 13K RPM
+  * Tach signal on blue/yellow
+  * Pinned red-blue-black (red-yellow-black) from pin marked ''1''
+{{:networking:switch:ffb0412shn-f00.png?400|Delta FFB0412SHN-F00}}
 ===== Initial Configuration =====
@@ Line 50: / Line 60: @@
 <file>
-no ip telnet server
+ip telnet server disable
 </file>
@@ Line 61: / Line 71: @@
 ip https certificate 1
 ip http secure-server
+</file>
+To disable HTTP:
+<file>
+no ip http server
+</file>
+<file>
+exit
+</file>
+After verifying connectivity via SSH or HTTPS, save the configuration by entering:
+<file>
+copy running-config startup-config
 </file>

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools