Differences

This shows you the differences between two versions of the page.

--- computing:storage:xpenology [2018/03/27 09:54]
gcooper
+++ computing:storage:xpenology [2024/09/19 13:25] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== XPEnology NAS ======
+FIXME Out of date
 **Forums**: https://xpenology.com
@@ Line 11: / Line 13: @@
 XPEnology is an OSS build of the Synology DSM operating system for Network Attached Storage appliances.
-:!: **If you need official support, you must buy a Synology NAS!**
+:!: **If you need official support or QuickConnect, you must buy a Synology NAS!**
 ===== Installation =====
@@ Line 19: / Line 21: @@
     - https://xpenology.com/forum/topic/7973-tutorial-installmigrate-dsm-52-to-61x-juns-loader/
   - **Download the latest boot loader** for DS3615sx:
-    - https://mega.nz/#F!BtFQ2DgC!JgomNP3X8V9EuwxL4TXbng!EscjTCAB
+    - https://xpenology.com/forum/topic/7848-links-to-loaders/
   - **Download the latest software image** for DS3615sx:
-    - https://xpenology.com/forum/topic/7294-links-to-dsm-and-critical-updates/
+    - https://archive.synology.com/download/DSM/release/
   - Use **OSFMount** to mount **Partition 0** in **read/write mode**
     - **OSFMount -> Mount New -> <select image> -> Partition 0 -> deselect "Read only" -> click OK**
@@ Line 33: / Line 35: @@
   - Use **Win32 DiskImager** to **burn the image to a USB drive**
   - Plug the **USB drive into the new NAS** and **reboot it**
+{{ :computing:storage:xpenology_booting.jpg?600 |This is all you see at the NAS!}}
+===== Configuration =====
 Use a PC web browser on the same network to **continue your installation and configuration**:
@@ Line 38: / Line 44: @@
 http://find.synology.com
-{{ :computing:storage:xpenology_booting.jpg?600 |This is all you see at the NAS!}}
+<note warning>Be sure to **disable automatic updates**!
+**DO NOT use QuickConnect!** It won't work and alerts Synology to your NAS.</note>
+===== Synology Hybrid RAID =====
+https://www.synology.com/en-us/knowledgebase/DSM/tutorial/Storage/What_is_Synology_Hybrid_RAID_SHR
+https://xpenology.club/enable-shr-in-dsm-6/
+  - **Edit** ''/etc.defaults/synoinfo.conf''
+    - **Above** the line: ''supportphoto="yes"''
+      - **Add** the line: ''support_syno_hybrid_raid = "yes"''
+    - **Comment** the line: ''#supportraidgroup="yes"''
+  - **Reboot** the NAS
-<note>Be sure to disable automatic updates to DSM!</note>
+:!: Correct the quote marks to **standard double-quote** marks!
+<note important>If you want SHR, choose the **Quick** option when creating a RAID array, along with the **BTRFS** filesystem.</note>

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools