User Tools
voice:phones:grandstream:gxp2000
Table of Contents
Grandstream GXP2000
http://www.intuitivevoice.com/assets/files/GrandstreamGXP2000PhoneSetup.pdf
Default Password: admin
Firmware and Ringtone Update
To update the GXP2000 firmware, change:
| Firmware Server Path | firmware.grandstream.com |
| Automatic Upgrade | Yes |
and reboot the phone.
Reset to Factory Defaults
- Press
OKbutton to bring up the keypad configuration menu - Select
Configthen pressOK - Select
Factory Reset - Enter the MAC address printed on the bottom of the phone
- Press the
OKbutton then pressOKbutton again to confirm
If the MAC address is correct, the phone will reboot. Otherwise, it will exit to the previous keypad menu.
Common Settings
Mostly changes from the defaults:
| Advanced Settings | |
|---|---|
| Firmware Upgrade and Provisioning | Usually TFTP or HTTP |
| Config Server Path | IP address of your PBX |
| Allow DHCP Option 66 to override server | Yes, if DHCP server provides |
| NTP Server | IP address of an NTP server |
| Allow DHCP Option 42 to override NTP server | Yes, if DHCP server provides |
| Account 1 | |
| Account Active | Yes |
| SIP Server | IP address of your PBX |
| Outbound Proxy | IP address of your PBX |
| SIP User ID | Extension number |
| Authenticate ID | Extension number |
| User ID is phone number | Yes |
| SIP Registration | Yes |
| Unregister On Reboot | Yes |
| Voice Mail UserID | *97 (common for Asterisk) |
| Send DTMF | via RTP(RFC2833) |
| Enable Call Features | Yes |
| Allow Auto Answer by Call-Info | Yes |
Don't forget to click on Update.
voice/phones/grandstream/gxp2000.txt · Last modified: 2015/05/04 08:24 by gcooper
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
