User Tools
voice:gateway:grandstream_ata
This is an old revision of the document!
Table of Contents
Grandstream Analog Gateways and ATAs
GXW-400x
- 4 or 8 Ports FXS
- Router
- 2x 10/100 Ethernet
GXW-410x
http://www.freepbx.org/forum/freepbx/tips-and-tricks/how-to-grandstream-gxw-4104-setup
- 4 or 8 Ports FXO
- 2x 10/100 Ethernet
HT70x ATA
| Model | Note |
|---|---|
| HT502 | 2 FXS Ports, Router |
| HT503 | 1 FXS, 1FXO, Router |
| HT701 | 1 FXS Port |
| HT702 | 2 FXS Ports |
| HT704 | 4 FXS Ports |
- DHCP client by default
- Factory reset
- Press reset button for 7 seconds
- Voice menu
- Connect analog phone or buttset
*for menu *02for IP address * Default password *admin==== Configuration ====yes
Start from factory default settings and use a web browser to access the current IP address.
=== Basic Settings ===
* Time Zone
=== FXS Settings ===
* Active = * Primary SIP Server =inbound23.vitelity.net* Outbound Proxy =outbound.vitelity.net* SIP User ID =<sub_acct_user_id>* Authenticate ID =<sub_acct_user_id>* Authenticate Password =<sub_acct_password>'' * Apply and Reboot**
voice/gateway/grandstream_ata.1470520039.txt.gz · Last modified: 2016/08/06 15:47 by gcooper
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
