This is an old revision of the document!

Cisco/Linksys PAP2T ATA Connection Notes

Mostly see here: http://wiki.voip.ms/article/Cisco_Linksys_PAP2

Also see here: Linksys/Sipura SPA-2100 ATA Connection Notes

Seven Digit Dialing

Modify the Dialplan in the Line1 (or Line2) settings by adding <:520> to the 7-digit section:

|<:520>[2-9]xxxxxx|

In this example, 520 is our local 7-digit area code.

(*xx|[3469]11|0|00|<:520>[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)

For maximum bandwidth savings, use g.729a.

Otherwise, choose (the default) g.711u (uncompressed) for best audio quality.

Also, be sure to set the RTP Packet Size to 0.020 on the SIP tab.