See also XenServer Networking Notes

http://vdinotes.com/2013/01/13/xenserver-get-out-of-emergency-mode/

http://innitec.wordpress.com/2009/12/24/correct-procedure-when-losing-all-nic-settings-on-xenserver-pool/

http://support.citrix.com/article/CTX131972

If the networking is completely messed up or you just want to start the networking configuration over from scratch (to DHCP):

xe-reset-networking

1. Set the XenServer to maintenance mode
   • This will migrate, suspend or shut down any VMs
2. Shut down the server normaly
3. Disconnect the power source(s)
4. Reconnect power and start the server
   • Don't start any VMs
5. Scan for new NICs
6. Reboot the server
7. Exit maintenance mode

Scan for new NICs and reboot:

xe pif-scan host-uuid=<your host UUID>

reboot

http://support.citrix.com/article/CTX135809

Get the current configuration:

interface-rename --list

Change:

interface-rename --update <target eth name>=MAC|PCI|Phys|"SMBios"

reboot