Needs updating and formatting

http://www.howtoforge.com/installing-xen-on-centos-5.2-i386

http://www.xen.org/products/cloudxen.html

http://wiki.xensource.com/xenwiki/XenOverview

Xen can run two types of Virtual Machines:

• Paravirtualized
  • No special hardware support required
  • Requires VM be modified
  • Generally only for Linux VMs
  • Offers top performance
• HVM fully virtualized
  • Requires hardware support by the mainboard, BIOS and CPU
    • http://en.wikipedia.org/wiki/Hardware-assisted_virtualization
  • Provides full virtualization of hardware including the BIOS

http://en.wikipedia.org/wiki/Xen

Generic Xen is managed using the “xm” command line interface which is significantly different than the “xe” tools used in XCP or XenServer.

There are also various other management consoles or tools for managing Xen:

http://en.wikipedia.org/wiki/Xen#Xen_Management_Consoles

http://www.xen.org/products/cloudxen.html

XCP is a free open-source bare-metal type 1 hypervisor originally based on XenServer.

http://wiki.xen.org/wiki/Command_Line_Interface

XCP is managed using “xe” commandline tools.

http://www.citrix.com/xenserver

XenServer is a bare-metal type 1 hypevisor. It is free but the license has to be renewed by Citrix and every year.

XenServer is managed via a Windows application, XenCenter, or using “xm” commandline tools.

Xen requires hardware

egrep '^flags.*(vmx|svm)' /proc/cpuinfo

Dom0 (Host OS)

Use 64-Bit for best performance and in order to be able to run 64-bit guests.

Use hardware supports Intel VT or AMD SVM for fully virtualized guests (Windows).

http://www.howtoforge.com/high-performance-xen-on-ubuntu-8.04-amd64

Install the Ubuntu Hardy Heron (x86_64) Server Edition

Create and install into a 10GB partition for Dom0

apt-get update
apt-get upgrade
apt-get install ubuntu-xen-server
apt-get install vim openssh-server

vi /etc/modules 

loop max_loop=64

uname -a
xm list

Minimal Server Install - CentOS 5

1. Boot to CD 1, the only CD needed
2. Enter “linux text” to get the text installation setup started
3. Create and install into a 10GB partition for Dom0
4. Proceed normally with the installation until it asks which packages to install
5. Deselect all of the packages and then click on the “customize package selection” check box
6. Hold down the “-” key, which scrolls through all of the package options, and deselects them all
7. Finish the install
8. Do a “yum update”
9. Do a “yum install <package>” for needed packages such as ssh-server

Use separate disk partition

mkfs.ext3 /dev/sdxn

mount /dev/sdxn /mnt 

debootstrap --arch amd64 hardy /mnt http://archive.ubuntu.com/ubuntu
mount --bind /dev /mnt/dev
mount proc /mnt/proc -t proc
chroot /mnt /bin/bash

Open another terminal and copy some files to the new guest partition. You may need to create some folders first.

cp /etc/resolv.conf /mnt/etc/resolv.conf
cp /etc/network/interface /mnt/network/interface
cp /etc/apt/source.list /mnt/etc/apt/sources.list
cp /etc/apt/source.list /mnt/etc/apt/sources.list
cp -R /lib/modules/2.6.24-17-xen/* /mnt/lib/modules/2.6.24-17-xen/

Back in the original (chroot'ed) terminal:

apt-get update
apt-get upgrade
apt-get install vim ssh

Edit the /etc/fstab file:

/dev/hda1               /               ext3	defaults        1  2

passwd
exit    #the chroot environment
umount  /mnt/dev /mnt/proc /mnt

Create the Xen configuration file adjusting the IP addressing

vi /etc/xen/domu1.cfg

kernel      = '/boot/vmlinuz-2.6.24-17-xen'
ramdisk     = '/boot/initrd.img-2.6.24-17-xen'
memory      = '512'
#
#  Disk device(s).
#
root        = '/dev/hda1 ro'
disk        = [
                  'phy:/dev/sda2,hda1,w',
			    ]
#
#  Hostname
#
name        = 'domu1'
#
#  Networking
#
vif         = [ 'ip=192.168.1.102,mac=00:16:3E:62:DA:BB' ]
#
#  Behaviour
#
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'
vcpus	    = '2'
extra = 'xencons=tty1'

xm create /etc/xen/domu1.cfg -c

xm list

Centos Guest

LAMP image on Centos 5 saved in /vm/xen on appserv

Create Centos 5 VM

http://mirrors.easynews.com//linux/centos/5.0/os/i386/

ln -s /etc/xen/vm01 /etc/xen/auto

chkconfig –list |grep “3:on” |awk '{print $1}' |sort

Disable TLS mv /lib/tls /lib/tls.disabled

Start xendomains service to stop/start the Xen domains listed in /etc/xen/auto

chkconfig –add xendomains

To stop or start all Xen domains in /etc/xen/auto service xendomains stop|start|restart

Start the xend management daemon chkconfig xend on

Minimal Services http://www.redhatmagazine.com/2007/03/09/understanding-your-red-hat-enterprise-linux-daemons/

Helpful Commands

Sometimes things get confused and communications fail:

/etc/init.d/xend restart

Other useful commands:

xm help xm list xm create vmname (start VM) xm console vmname control-] (exit domU to dom0 console) xm shutdown vmname xm destroy vmname (emergency shutdown) virt-install

Backup

Backup is not so simple. Image files are pre-allocated and very large - keep them small! They also change frequently so they get backed up every backup run in a file-by-file backup.

Need disk-block backup or LVM snapshots.

This script suspends, creates a compressed copy of the disk image and resumes all running Xen domains: xen_backup.sh

In BackupPC, I use this DumpPreUsrCmd:

$sshPath -l root $host /usr/local/bin/xen_backup.sh

You can check the log like this:

tail -50 /var/log/xen/xen_backup.log

Currently, on Linus, the woodstock backup is blacked out except for 3:00am Monday morning. This allows BackupPC on appserv to complete any lengthy full backups over the weekend.

The DumpPreUsrCmd script suspends/resumes each VM in turn: ISPConfig shuts down for about 1:10, appserv for about :39 and mgmt takes about :48 minutes.

Virtual Machine Manager

http://virt-manager.et.redhat.com/

yum install kernel-xen xen virt-manager

The “Virt Install” tool (virt-install for short command name, virtinst for package name) is a command line tool which provides an easy way to provision operating systems into virtual machines.

The “Virt Clone” tool (virt-clone for short command name, virtinst for package name) is a command line tool for cloning existing inactive guests. It copies the disk images, and defines a config with new name, UUID and MAC address pointing to the copied disks.

The “Virt Image” tool (virt-image for short command name, virtinst for package name) is a command line tool for installing guest operating systems based on a pre-defined master image. The image provides metadata describing the requirements of the operating system, minimal resource allocations, and pre-installed disk.

The “Virtual Machine Viewer” application (virt-viewer for short package name) is a lightweight interface for interacting with the graphical display of virtualized guest OS. It uses GTK-VNC as its display capability, and libvirt to lookup the VNC server details associated with the guest. It is intended as a replacement for the traditional vncviewer client, since the latter does not support SSL/TLS encryption of x509 certificate authentication.

Live Migration

' # virt-clone \ –original demo \ –name newdemo \ –file /var/lib/xen/images/newdemo.img '

/etc/xen/scripts/vif-bridge: Could not find bridge device xenbr0

Last changed (in Tomboy): 2010-11-15 Note created (in Tomboy): 2007-07-28