It is necessary to enable the PXE Boot Server.

1. In the 2X Remote Application Server Console Click on “Farm” icon
2. Under Farm click on “Gateways” (Gateway must be in Normal mode to support Thin Clients)
3. Right click on the current Gateway, choose Properties.
4. Click the “Network” tab
5. Under Thin Client network Boot Support tick box next to enable that option
6. Enable DHCP proxy (Port 67)

This will boot a Thin Client/PC to the 2X OS

1. Configure the PC/Thin Client to PXE boot (Boot to LAN) in BIOS
2. Boot to PXE and note MAC Address displayed during boot IE 74-D4-35-E5-67-9A
3. In the 2X Remote Application Server Console Click on “Client Manager” icon
4. Click the + (add) button
5. Enter the MAC Address, click Next
6. Enter descriptive Hostname or leave at default TC-(MAC Address)
7. If you have a group configured for this device select that group
8. If Boot Method is other than “Network Boot” change to “Network Boot”, click Next
9. Use defaults on other screens if the group is configured or untick Use Group settings and configure

http://www.2x.com/thinclientserver/tcs_manual/2XThinClientServer.html

32-Bit

Works with AppArmor and selinux

yum install compat-libstdc++-33.i386

rpm -Uvh 2XThinClientServer_i386.rpm

2Xthinclientserver_conf.sh

Uses (installs) mysql (3306), apache (980, 943), dhcphelper (67, 4011) and tftp (69)

Beta version supposedly supports 'external' mysql and MSSQL