Virtual Architects Support Wiki

User Tools

Site Tools

You are here: start » quick_guide » freepbx_ucp
Trace: • freepbx_ucp
quick_guide:freepbx_ucp

This is an old revision of the document!

Table of Contents

FreePBX User Control Panel

http://wiki.freepbx.org/display/FPG/User+Control+Panel-Follow+Me

https://wiki.freepbx.org/display/FPG/Follow+Me+User+Guide

http://wiki.freepbx.org/display/FPG/Contact+Manager+Module

The FreePBX phone system has a User Control Panel where you can control various settings for your extension such as:

  • Change your PIN
  • Contact Manager
  • Find Me/Follow Me
  • Call Forwarding
  • Call Waiting
  • Do Not Disturb

:!: On FreePBX 2.11 and older systems, your extension number is your username and your PIN is your password.

:!: On FreePBX 12 and newer systems, your username and password are maintained separately and you should receive an e-mail message with your login details.

:!: Please change your password by clicking on the 'Gear' icon in the upper right after logging in the first time.

Access the UCP

The UCP is generally only accessible from your LAN (local area network). In other words, the UCP is only available from inside your firewall. If external access is needed, the firewall can be adjusted. 
https://pbx.yourdomain.tld/ucp/
You must use HTTPS protocol to access the UCP or you will see a bold red error message in the UCP web interface.

Error with No HTTPS

FollowMe

External numbers should be added to the FollowMe List in the following format: 

1NXXNXXXXXX#

which is 1 + area code + number + #.

quick_guide/freepbx_ucp.1520612736.txt.gz · Last modified: 2018/03/09 09:25 by gcooper

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki