Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== WiFi Channel Notes ======

<note tip>A mobile device with both 2.4GHz and 5GHz capability, with an analyzer app, is a great tool to have!</note>

**Windows** [[https://www.metageek.com/products/inssider|Windows WiFi Analyzer]]

**Android** [[https://play.google.com/store/apps/details?id=com.farproc.wifi.analyzer|Wifi Analyzer]]

===== 2.4GHz =====

**There are only 3 non-overlapping channels 1 (2412MHz), 6 (2437MHz) and 11 (2462MHz).**  All others overlap significantly, causing adjacent-channel interference.

2.4GHz channels are **20 MHz wide**.

In the busy 2.4GHz range, **using wider channels will often result in more interference** and may not gain any throughput performance improvements.  **Check your environment** before implementing wider channels.

When setting up multiple access points (APs), assign each AP to a different channel and separate them as much as possible.

{{ :networking:2.4ghz-channels.png?direct&600 |Non-Overlapping 2.4GHz Channels}}

===== 5GHz =====

https://www.alphr.com/the-best-wifi-channel-for-5ghz/

https://www.maketecheasier.com/best-wifi-channel-for-5ghz-frequency/

Newer 5GHz WiFi is faster, can transfer far more data in shorter amounts of time, has more available channels and will likely have less interference compared to 2.4GHz WiFi.

There are 23 non-overlapping channels in the 5GHz band.

As with 2.4GHz, choose your channel and channel width based on the existing WiFi environment to avoid interference.

{{ :networking:5ghz-channels.png?direct&600 |5GHz Channels}}

Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools