Metro Ethernet Notes: http://www.experts-exchange.com/Hardware/Networking_Hardware/Routers/Q_23688899.html

Example with Wireless: http://mum.mikrotik.com/presentations/CZ09/VLAN-Workshop-Prague-final.pdf

Great examples with CoS: http://wiki.mikrotik.com/wiki/Vlans_on_Mikrotik_environment

• VLAN = Broadcast Domain
• VLAN interfaces on MikroTik devices are “add tag on egress / remove tag from ingress”
• To be able to forward packets from access-ports to VLANs, we need bridges

• Create VLAN sub-interfaces on physical interfaces
• Bridge the sub-interfaces
• IP addresses are then configured on the respective bridges
• Treat EoIP tunnel interfaces like physical interfaces
• If you are not stripping tags, you don't need to configure the VLAN interfaces, at least on physicsal trunk ports

1. Configure VLANs on trunk interface ports

   • /interface vlan add name=vlan-10 vlan-id=10 interface=ether5 disabled=no

2. Create bridges for the VLANs

   • /interface bridge add name=br-vlan10 disabled=no

3. Add access-ports to the bridges

   • /interface bridge port add interface="vlan-10" bridge="br-vlan10" disabled=no
     /interface bridge port add interface="ether1" bridge="br-vlan10" disabled=no

http://blog.butchevans.com/2010/02/to-tag-or-not-to-tag-that-is-the-question/

http://forum.mikrotik.com/viewtopic.php?t=24352

http://networkingforintegrators.com/2012/12/mikrotik-basic-vlan-example/

http://berbagitulisan.com/?p=9

https://vanachterberg.org/2011/09/per-vlan-pptp-with-routeros-and-mikrotik/