SmokePing: https://oss.oetiker.ch/smokeping/index.en.html

Tools must be run with admin privileges.

GPing: https://sourceforge.net/projects/gping/

• Runs in memory

PingLogger: http://pinglogger.co.uk/

• Creates database in same folder
• Doesn't log actual time

Windows: http://linhost.info/2010/02/iperf-on-windows/

Download: http://iperf.fr/

What's Happening: http://www.es.net/assets/Uploads/201007-JTIperf.pdf

More Under the Hood: http://www.nanog.org/meetings/nanog43/presentations/Dugan_Iperf_N43.pdf

Examples: http://www.enterprisenetworkingplanet.com/netos/article.php/3657236/Measure-Network-Performance-with-iperf.htm

• Command line only
• Requires an Iperf client and an Iperf server
• Server listens on port 5001 by default
  • It may be necessary to open this port on the firewall
• Run tests multiple times and average
• Adjust settings up and down, then run test again
  • TCP window size (TCP)
  • Buffer size (TCP)
  • Bandwidth (UDP)
• Use the UDP test below as a quickie starting point

Start the iperf server:

iperf -s

Start the iperf client and point it at the IP address of the iperf server:

iperf -c 192.168.1.70

Sample results:

------------------------------------------------------------
Client connecting to 192.168.1.70, TCP port 5001
TCP window size: 64.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.0.201 port 49269 connected with 192.168.1.70 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.1 sec  25.5 MBytes  21.2 Mbits/sec

Changing the iperf options will modify the parameters of the testing.

For help on options type:

iperf --help

This is an example of options that fully test a Gigabit network by changing:

• TCP window size
• Length of buffer to read or write
  • The default is 8 KB
• Using 5 parallel threads
  • The default is 1

iperf -c 192.168.1.2 -w 512k -l 512k -P 5

iperf -s -w 512k -l 512k

Sample results:

------------------------------------------------------------
Server listening on TCP port 5000
TCP window size:   256 KByte (WARNING: requested   512 KByte)
------------------------------------------------------------
[  7] local 192.168.1.2 port 5000 connected with 192.168.1.3 port 1499
[  4] local 192.168.1.2 port 5000 connected with 192.168.1.3 port 1500
[  5] local 192.168.1.2 port 5000 connected with 192.168.1.3 port 1501
[  6] local 192.168.1.2 port 5000 connected with 192.168.1.3 port 1502
[  8] local 192.168.1.2 port 5000 connected with 192.168.1.3 port 1503
[  6]  0.0-10.0 sec    221 MBytes    185 Mbits/sec
[  7]  0.0-10.0 sec    227 MBytes    190 Mbits/sec
[  8]  0.0-10.0 sec    226 MBytes    189 Mbits/sec
[  4]  0.0-10.1 sec    222 MBytes    186 Mbits/sec
[  5]  0.0-10.1 sec    225 MBytes    188 Mbits/sec
[SUM]  0.0-10.1 sec  1.10 GBytes    935 Mbits/sec

Make sure your testing client and server have Gigabit NICs (don't ask me how I know).

• UDP
• Send at 1Gbps
  • Adjust for your network
  • Use something just over your physical connection rate
• Use 10 threads

Server:

iperf -su

Client:

iperf -c 192.168.2.50 -u -b 1G -P 10

Switch testing with Iperf

http://www.cinevate.com/blog/confessions-of-a-10-gbe-network-newbie-part-2-test-toolkit/

https://gallery.technet.microsoft.com/NTttcp-Version-528-Now-f8b12769

https://www.softperfect.com/products/ramdisk/

Note Unless you have a large RAID array hard disks will not fill a 10Gb pipe. SoftPerfect RAMDisk will speed data transfer. Allocate and format 12GB for the RAMDisk.

• Download NTttcp Utility and copy to 2 Windows PCs on the network.
• Make sure the NTttcp traffic can pass the firewall on both PCs. Specify a firewall exception for the program name.
• Run this command First on the Receiver

  ntttcp.exe -r -m 16,*,192.168.0.140 -l 128k -a 2 -t 20

• Run this command Second on the Server

  ntttcp.exe -s -m 16,*,192.168.0.140 -l 128k -a 2 -t 20

Note The receiver machine in this case has an IP address of 192.168.0.140. You must specify the receiver’s IP address on the server instance.