User Tools

Site Tools


networking:monitoring:zenoss_devices

This is an old revision of the document!


Zenoss Monitored Devices

:!: SNMP protocol uses port 161/udp (read, device) and port 162/udp (trap, server).

CentOS Linux Host

service snmpd stop

mv /etc/snmp/snmpd.conf /etc/snmp/snmpd.conf.bak

echo "rocommunity public" > /etc/snmp/snmpd.conf

service snmpd start

Mikrotik Devices

Install the Mikrotik ZenPack.

Get info:

/snmp print
/snmp community print

Enable SNMP:

/snmp set enabled=yes

Limit access if the device has a public IP:

/snmp community set public addresses=10.10.1.0/24

Citrix XenServer

  • Monitoring is performed using XenAPI

Install the XenServer ZenPack.

Add Server

Infrastructure → Devices → Add XenServer Endpoint (+)

  • Use root and root password
  • Discovery is scheduled
    • Advanced → Jobs
networking/monitoring/zenoss_devices.1399918658.txt.gz · Last modified: 2014/05/12 12:17 by gcooper