User Tools
networking:firewall:ufw
This is an old revision of the document!
Table of Contents
UFW Firewall
UFW is the default firewall configuration tool on Ubuntu and is simple to install on Debian.
https://www.digitalocean.com/community/tutorials/ufw-essentials-common-firewall-rules-and-commands
Getting Started: https://www.howtoforge.com/tutorial/ufw-uncomplicated-firewall-on-ubuntu-15-04/
Reset UFW
ufw --force disable ufw --force reset ufw default deny incoming ufw default allow outgoing ufw allow 2222/tcp #Example ufw --force enable ufw status
Custom Rules
This needs further confirmation. Consider this a starting point.
This example is for filtering (further restricting) external access to ports published (opened externally) by Docker. Consider this a firewall in front of the Docker firewall. Once you start with this, you will need to maintain it to control access to all your Docker apps.
Docker published ports are globally accessible and this is not limited by normal filtering rules. This is probably unwanted in some cases such as admin URLs to web apps running under Docker.
vim /etc/ufw/after.rules
Insert the lines mentioning Docker, in the locations shown. Modify the destination ports as needed.
# # rules.input-after # # Rules that should be run after the ufw command line added rules. Custom # rules should be added to one of these chains: # ufw-after-input # ufw-after-output # ufw-after-forward # # Don't delete these required lines, otherwise there will be errors *filter :ufw-after-input - [0:0] :ufw-after-output - [0:0] :ufw-after-forward - [0:0] :DOCKER-USER - [0:0] # End required lines # Custom rules for Docker apps -A DOCKER-USER -i eth0 -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A DOCKER-USER -i eth0 -m conntrack --ctstate INVALID -j DROP -A DOCKER-USER -i eth0 --match multiport -p tcp --dports 80,443,22115:22119 -j ACCEPT -A DOCKER-USER -i eth0 --match multiport -p udp --dports 22116 -j ACCEPT -A DOCKER-USER -i eth0 --match multiport -p tcp --dports 81,9443 --source 192.168.1.0/24,10.0.0.0/24 -j ACCEPT -A DOCKER-USER -i eth0 -m conntrack --ctstate NEW -j LOG --log-prefix "DOCKER-USER_DROP " -A DOCKER-USER -i eth0 -m conntrack --ctstate NEW -j DROP # don't log noisy services by default -A ufw-after-input -p udp --dport 137 -j ufw-skip-to-policy-input -A ufw-after-input -p udp --dport 138 -j ufw-skip-to-policy-input -A ufw-after-input -p tcp --dport 139 -j ufw-skip-to-policy-input -A ufw-after-input -p tcp --dport 445 -j ufw-skip-to-policy-input -A ufw-after-input -p udp --dport 67 -j ufw-skip-to-policy-input -A ufw-after-input -p udp --dport 68 -j ufw-skip-to-policy-input # don't log noisy broadcast -A ufw-after-input -m addrtype --dst-type BROADCAST -j ufw-skip-to-policy-input # don't delete the 'COMMIT' line or these rules won't be processed COMMIT
networking/firewall/ufw.1659037400.txt.gz · Last modified: 2022/07/28 13:43 by gcooper
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
