Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Syslog with Graylog ======

**Excellent Documentation**: https://docs.graylog.org/en/4.1/index.html

**Installation**: https://docs.graylog.org/en/4.1/pages/installation/os/ubuntu.html#ubuntuguide

**Install Graylog OSS on Ubuntu**: https://www.itzgeek.com/how-tos/linux/ubuntu-how-tos/how-to-install-graylog-on-ubuntu-20-04.html

**Getting Started**: https://docs.stackhero.io/en/Graylog

**Getting Started Docs**: https://docs.graylog.org/en/4.1/pages/getting_started.html

https://docs.graylog.org/en/3.1/pages/faq.html#how-can-i-start-an-input-on-a-port-below-1024

https://github.com/Graylog2/graylog-guide-syslog-linux

{{ :computing:linux:graylog_simple.png?direct&350|Simple Graylog Server}}

Graylog is a web interface to your syslog server, and much more.  It is available in a free open source edition as well as commercial editions with  more features.

**To scale well**, Graylog depends on:

  * **Fast CPUs** (Graylog)
  * **Lots of RAM** (Elasticsearch)
  * **Fast storage** (Elasticsearch)

**Active, searchable data is in memory** and easily lost.

**Archived data is stored in a compressed format on the Graylog server** or network file share. It is searchable via GREP, but must be reconstituted in Graylog in order to be searchable through the GUI again.

===== Upgrade =====

We use ''apt'' repositories for installation, so updates are easy:

Show all ''apt'' sources:

<file>
grep -r --include '*.list' '^deb ' /etc/apt/sources.list*
</file>

<file>
apt update && apt dist-upgrade -y && apt autoremove -y && apt clean && reboot
</file>

===== Configuration =====

The Graylog configuration file is ''/etc/graylog/server/server.conf''.

The Elasticsearch config file is: ''/etc/elasticsearch/elasticsearch.yml''.

==== Syslog Input ====

The first step to accept input is to create an ''Input'' (listener), perhaps "Syslog UDP".

It is recommended to configure the syslog ''Input'' to accept traffic on **UDP port 1514** and redirect traffic sent to UDP 514 to it.

<file>
iptables -t nat -A PREROUTING -p tcp --dport 514 -j REDIRECT --to 1514
iptables -t nat -A PREROUTING -p udp --dport 514 -j REDIRECT --to 1514
</file>

<note>We use Webmin and CSF with LFD for all firewalls.  Even though this Graylog server is probably an internal host, we also use it here.

See also **[[networking:firewall:csf|https://virtualarchitects.com/wiki/doku.php?id=networking:firewall:csf]]**</note>

==== Create Index ====

Indexes are how data is stored and rotated.

==== Create Stream ====

Stream Rules route or sort messages into indexes.

===== Log Sources =====

==== Send Linux Syslog ====

https://github.com/Graylog2/graylog-guide-syslog-linux/
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
