User Tools
computing:ubcd
This is an old revision of the document!
Table of Contents
Ultimate Boot CD
Create Bootable USB with Linux
Extract the ISO
Mount the latest UBCD ISO or CD
Extract UBCD files to a temporary location:
mkdir ~/Desktop/UBCDextracted rsync -avr /media/<username>/UBCD528/* /home/<username>/Desktop/UBCDextracted/
Partition the USB Flash Drive
sudo su
Determine which USB drive:
fdisk -l
Blank the USB drive (optional):
dd if=/dev/zero of=/dev/sdX
Create a FAT32 partition and filesystem:
Make the partition type 'c' (W95 FAT32 (LBA)) and 'active' (bootable).
fdisk /dev/sdX
Create the Filesystem
mkfs.vfat -F 32 -n UBCD /dev/sdX1
Copy the Files to the USB Flash Drive
Replug the USB flash drive to mount the filesystem.
cd /home/<username>/Desktop/UBCDextracted/ rsync -avr /home/<username>/Desktop/UBCDextracted/* /media/<username>/UBCD/
Make the USB Flash Drive Bootable
dd if=./ubcd/tools/linux/ubcd2usb/mbr.bin of=/dev/sdX chmod +x ./ubcd/tools/linux/ubcd2usb/syslinux ./ubcd/tools/linux/ubcd2usb/syslinux --install --directory /boot/syslinux /dev/sdX1 sync
computing/ubcd.1389463181.txt.gz · Last modified: 2014/01/11 10:59 by gcooper
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
