See also: Working with Disk Images

This information is pretty much the same for any type of flash storage.

Save the entire flash (disk) image as a .img file for easy restoration in case of an emergency.

Make sure SSH (server) is enabled on the machine containing the flash memory card. You may also need to open a port on the firewall (port 222 in this example of a non-standard SSH port) if you need access from the Red (Internet) interface.

To back up an IPCop firewall/router from a Unix or Linux machine or Cygwin on a Windows machine issue:

ssh -p 222  root@ip.of.ser.ver "dd if=/dev/harddisk" | gzip > backup.img.gz

For other than IPCop, you can omit the '-p 222' because SSH is normally on port 22.

Change the IP address to your own IP or DNS name

You must adjust the '/dev/harddisk' to meet your needs.

CF cards are often /dev/hda or /dev/hdb.

/dev/sda (first SCSI disk) is common for USB flash drives.

If the system you are backing up does not have the gzip utility, use this

ssh -p 222  root@ip.of.ser.ver "dd if=/dev/harddisk" > backup.img

Here is another example backing up a Sonora Advanced Router where the CF card is /dev/hdc:

ssh root@ip.of.rou.ter "dd if=/dev/hdc" | gzip > backup.img.gz

This command utilizes ssh's ability to run commands submitted at the end of the command line. In this case the command sequence uses the dd command to copy the entire physical compact flash device and then put the output into a file on your local computer.