Table of Contents
Grandstream Analog Gateways and ATAs
GXW-400x
- 4 or 8 Ports FXS
- Router
- 2x 10/100 Ethernet
GXW-410x
http://www.freepbx.org/forum/freepbx/tips-and-tricks/how-to-grandstream-gxw-4104-setup
- 4 or 8 Ports FXO
- 2x 10/100 Ethernet
HT70x ATA
| Model | Note |
|---|---|
| HT502 | 2 FXS Ports, Router |
| HT503 | 1 FXS, 1FXO, Router |
| HT701 | 1 FXS Port |
| HT702 | 2 FXS Ports |
| HT704 | 4 FXS Ports |
- DHCP client by default
- Factory reset
- Press reset button for 7 seconds
- Voice menu
- Connect analog phone or butt set to FXS port
- Dial three asterisks for voice menu
- Then dial
02to hear current IP address
- Default password
admin
Configuration
Start from factory default settings and use a web browser to access the current IP address.
Basic Settings
- Time Zone
FXS Settings
- Active =
yes - Primary SIP Server =
inbound23.vitelity.net - Outbound Proxy =
outbound.vitelity.net - SIP User ID =
<sub_acct_user_id> - Authenticate ID =
<sub_acct_user_id> - Authenticate Password =
<sub_acct_password> - Apply and Reboot
Dial Plan
Factory default:
{ x+ | *x+ | *xx*x+ }
7 and 11 digit dialing, plus emergency and international:
{<=1520>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|[89]11|011x+}