====== Grandstream GXV3275 ======

**Quick Guide**: http://www.grandstream.com/sites/default/files/Resources/GXV3275%20Quick%20User%20Guide_0.pdf

**Admin Guide**: http://www.grandstream.com/sites/default/files/Resources/gxv3275_administration_guide.pdf

**BLF Guide**: http://www.grandstream.com/sites/default/files/Resources/GXV32xx_broadworks_BLF_Guide.pdf

**Firmware**: http://www.grandstream.com/support/firmware

  * Voice
  * Video
  * Bluetooth
  * Wallmount Bracket
  * Video Conferencing

===== Default Credentials =====

^Username  |admin  |
^Password  |admin  |

===== Dialing Timer =====

To adjust the timeout when dialing calls manually (offhook):

**Phone Web Interface -> Account -> Account # -> Call Settings -> No Key Entry Timeout**

===== Transfer Calls =====

==== Attended (announced) ====

  - While in the call, tap the ''More'' softkey and select the ''Transfer'' option.
  - Select the ''Attended'' softkey located in the upper left-hand side of the screen.
  - Enter the extension you wish to transfer to or select a contact from the list on the left hand side.
  - Tap the ''Send'' softkey.
  - After the call is answered and announced press the ''Transfer'' key to complete the transfer.

Press the ''Cancel'' softkey to cancel the transfer at any time.

==== Unattended (blind) ====

  - While in the call, tap the More softkey and select the Transfer option.
  - Select the Blind softkey located in the upper left-hand side of the screen.
  - Enter the extension you wish to transfer to or select a contact from the list on the left hand side.
  - Tap the Send softkey to complete the transfer.

==== Directly to Voicemail ====

Do an unattended transfer, but **preface the extension number with '*' (star or asterisk)**.  In other words just do a blind transfer to *nnnn where nnnn is the voicemail extension mailbox you want to transfer the caller into.

===== Call Pickup =====

==== Directed Call Pickup ====

Asterisk uses <file>**<extension></file> to pick up a ringing extension.

The Grandstream GXV3275 defaults to using the <file>**</file> BLF prefix.  However the default DialPlan does not allow dialing the default BLF prefix.  Go figure...

:!: You must **modify the default dial** plan by adding <file>**xxx</file> (assuming 3-digit extension numbers) as a unique dial option.

===== Intercom (internal call auto-answer) =====

This is a per-extension setting.  Each extension can be different.

If this feature is enabled, calls from internal extensions will auto-answer in speakerphone mode.

===== Do Not Disturb (DND) =====

To turn DND on or off:

  - At the idle screen, touch and drag the status bar down then tap on ''System Settings''
  - Tap on the ''DND'' icon

===== Factory Default =====

**Maintenance -> Upgrade -> Factory Reset** (bottom)