====== Grandstream Analog Gateways and ATAs ======

===== GXW-400x =====

  * 4 or 8 Ports **FXS**
  * Router
  * 2x 10/100 Ethernet

===== GXW-410x =====

http://www.freepbx.org/forum/freepbx/tips-and-tricks/how-to-grandstream-gxw-4104-setup

  * 4 or 8 Ports **FXO**
  * 2x 10/100 Ethernet

===== HT70x ATA =====

^ Model  ^ Note                ^
| HT502  | 2 FXS Ports, Router |
| HT503  | 1 FXS, 1FXO, Router |
| HT701  | 1 FXS Port          |
| HT702  | 2 FXS Ports         |
| HT704  | 4 FXS Ports         |

  * DHCP client by default
  * Factory reset
    * Press reset button for 7 seconds
  * Voice menu
    * Connect analog phone or butt set to FXS port
    * Dial **three asterisks** for voice menu
      * Then dial ''02'' to hear current IP address
  * Default password
    * ''admin''

==== Configuration ====

:!: Start from **factory default** settings and use a **web browser** to access the current IP address.

=== Basic Settings ===

  * Time Zone

=== FXS Settings ===

  * **Active** = ''yes''
  * **Primary SIP Server** = ''inbound23.vitelity.net''
  * **Outbound Proxy** = ''outbound.vitelity.net''
  * **SIP User ID** = ''<sub_acct_user_id>''
  * **Authenticate ID** = ''<sub_acct_user_id>''
  * **Authenticate Password** = ''<sub_acct_password>''
  * **Apply** and **Reboot**

== Dial Plan ==

Factory default:

<file>
{ x+ | *x+ | *xx*x+ }
</file>

7 and 11 digit dialing, plus emergency and international:

<file>
{<=1520>[2-9]xxxxxx|1[2-9]xx[2-9]xxxxxx|[89]11|011x+}
</file>