Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Grandstream GXP2000 ======

http://www.intuitivevoice.com/assets/files/GrandstreamGXP2000PhoneSetup.pdf

**Default Password**: admin

===== Firmware and Ringtone Update =====

To update the GXP2000 firmware, change: 

|Firmware Server Path  |''firmware.grandstream.com'' |
|Automatic Upgrade     |Yes                          |

and reboot the phone.

===== Reset to Factory Defaults =====

  - Press ''OK'' button to bring up the keypad configuration menu
  - Select ''Config'' then press ''OK''
  - Select ''Factory Reset''
  - Enter the MAC address printed on the bottom of the phone
  - Press the ''OK'' button then press ''OK'' button again to confirm

:!: If the MAC address is correct, the phone will reboot. Otherwise, it will exit to the previous keypad menu.

===== Common Settings =====

Mostly changes from the defaults:

^Advanced Settings                           ^                                 ^
|Firmware Upgrade and Provisioning           |Usually TFTP or HTTP             |
|Config Server Path                          |IP address of your PBX           |
|Allow DHCP Option 66 to override server     |Yes, if DHCP server provides     |
|NTP Server                                  |IP address of an NTP server      |
|Allow DHCP Option 42 to override NTP server |Yes, if DHCP server provides     |
^Account 1                                   ^                                 |
|Account Active                              |Yes                              |
|SIP Server                                  |IP address of your PBX           |
|Outbound Proxy                              |IP address of your PBX           |
|SIP User ID                                 |Extension number                 |
|Authenticate ID                             |Extension number                 |
|User ID is phone number                     |Yes                              |
|SIP Registration                            |Yes                              |
|Unregister On Reboot                        |Yes                              |
|Voice Mail UserID                           |*97 (common for Asterisk)        |
|Send DTMF                                   |via RTP(RFC2833)                 |
|Enable Call Features                        |Yes                              |
|Allow Auto Answer by Call-Info              |Yes                              |

:!: Don't forget to click on **Update**.
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
