Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== MyPBX Soho ======

  * Yeastar is affiliated with Yealink IP phones
    * http://www.yeastar.com/products/MyPBX-SOHO.asp
    * http://www.yealink.com/
  * No IAX2 support
  * No WAN port

===== Default Settings =====

Web management: http://192.168.5.150

==== Default Credentials ====

^Application    ^Username   ^Password      ^
|Web Management |admin      |password      |
|CLI (SSH)      |root       |ys123456      |

:!: You should change the ''admin'' password with the web interface on first login.

:!: You should change the ''root'' password with the ''passwd'' command.

===== Network Settings =====

  * Change the IP address, enable SSH on port 22, save, then reboot the unit
  * If you have trouble accessing the MyPBX at the new address, power cycle the unit

===== Date and Time =====

  * Set the timezone and daylight savings, then reboot

===== Voicemail Settings =====

  * Set up the SMTP server settings

==== Local Mail Server ====

For a local mail server with a trusted IP address:

^SMTP Server |  <IP_of_Server>  |
^Port        |  25            |

All else blank/unset.

==== Remote Mail Server ====

For SSL, I had to manually edit /etc/ssmtp/ssmtp.conf to be something like:

<file>
mailhub=<your mailserver fqdn>:465
AuthUser=<smtp user name>
AuthPass=<smtp user password>
UseTLS=YES
root=postmaster
hostname=mypbx
rewriteDomain=<your.domain.tld>
</file>

===== Options =====

  * It is easiest to just use the defaults
  * If you want to change these settings, do it first

===== Extensions =====

  * It is easiest to just use the default extensions
  * However, you should modify them:
    * use strong passwords
    * set pickup group to 1

===== Trunks =====

  * The analog ports are already set up

===== Outbound Routes =====

  * If all outgoing calls are to be routed through the analog ports, edit the default route
    * Change the pattern to "X."
    * Do not strip any digits

:!: At this point, you should be able to make an outgoing call, and probably receive incoming calls too.

===== Ring Groups =====

  * The default ring group may be sufficient
  * Adjust to your needs and/or create other ring groups
    * Such as "Operators" or "Reception"

===== Inbound Routes =====

  * The default inbound route may be sufficient
    * It routes calls to the default "Welcome" IVR
  * Minimally, you will want to:
    * Re-record the 'default' greeting
    * Or edit the default inbound route to point to an extension or a ring group

===== Time Conditions =====

  * You may leave the Office Hours function disabled
  * Define your office open hours
    * Anything not included will be closed hours

^Monday-Friday    |9:00-12:00  |13:00-17:00 |00:00-00:00 |
^Saturday-Sunday  |00:00-00:00 |            |            |

:!: Enable and save

===== IVRs =====

  * First, decide if you want a phone or phones to ring before the IVR answers
    * If you do, create a 'reception' ring group that goes to the 'welcome' IVR if no one answers
  * Re-record the 'default' IVR prompt for business hours
  * Record an 'invalid' IVR prompt
  * Record a new night' IVR prompt
  * Edit the 'welcome' IVR

===== Remote Extensions =====

http://www.yeastar.com/download/Register-To-MyPBX-Remotely.pdf

  * Forward UDP ports into the PBX:
    * 5060, 10001-10200
  * Set remote extension definition:
    * NAT

==== SIP Settings for Remote ====

  * Set one of:
    * Extern IP	(if static IP)
    * Extern Host (if dynamic DNS)
  * Also set:
    * Extern Refresh ''5'' (if dynamic DNS)
    * Local Network Address ''192.168.0.0/255.255.0.0''

===== Link Two MyPBX =====

http://www.yeastar.com/download/Intercommunication-between-two-MyPBX.pdf
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
