Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Manually Add and Remove IP Addresses to a Mikrotik Blacklist ======

FIXME **New**: https://forum.mikrotik.com/viewtopic.php?t=105444

:!: This assumes you have a address list named ''blacklist'' that is being blocked.

<file>
/ip firewall address-list add comment="Manual Addition" list=blacklist address=xxx.xxx.xxx.xxx
</file>

<file>
/ip firewall address-list remove [/ip firewall address-list find address=xxx.xxx.xxx.xxx]
</file>

===== Create Blacklist from Apache Logs =====

Filter the log entries for attackers first.

Example from a recent Joomla experience where an attacking botnet utilized a vulnerable 'contacts' page:

:!: You will want to change ''contact-me'' and the log file name for your needs.

<file>
grep contact-me /var/log/virtualmin/exmple.com_error_log >> example.txt
</file>

:!: Some Apache logs have the IP address as the first field.

Strip it down to IP addresses:

<file>
awk '{ print $1 } ' example.txt | sort | uniq > evildoers.txt
</file>

Or, to just determine how many attackers there were:

<file>
awk '{ print $1 } ' example.txt | sort | uniq | wc -l
</file>

:!: Some newer Apache logs have the IP address deeper in the line.

<file>
cat bloody1.txt | awk '{ print $11 } ' | awk -F ':' '{ print $1 } ' | sort | uniq > evildoers.txt
</file>

Create a Mikrotik script to add the evildoers to a 'blacklist' address-list:

<file>
echo "/ip firewall address-list" > add-to-blacklist.rsc
cat evildoers.txt | awk --posix '/^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}/ { print "add list=blacklist address=" $1 " comment=Joomla-Contact-Botnet";}' >> add-to-blacklist.rsc
</file>

You can make the address-list entries dynamic by specifying a timeout by adding ''timeout=30d'' or something like that, just before the comment.

Upload the ''add-to-blacklist.rsc'' script to the Mikrotik (drag into Files window), then import it in a Mikrotik terminal window:

<file>
/import add-to-blacklist.rsc
</file>

====== Script ======

FIXME Super slow and may not be 100% correct for ROS v7.

:!: You should first run this script at the ROS command line to look for errors.

:!: Make sure UNIX line endings are used in the ''ipaddress.txt'' file.

:!: Make sure the ''ipaddress.txt'' file is less than 4K in size.

<file>
/system script add dont-require-permissions=no name=add-ip-addresses-to-blacklist owner=\
    admin policy=\
    ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon source="#\
    # Generic IP address list input\r\
    \n## Based on a script written by Sam Norris, ChangeIP.com 2008\r\
    \n## Edited by Andrew Cox, AccessPlus.com.au 2008\r\
    \n##\r\
    \n:put \"\";\r\
    \n:put \"This script requires the address text file to have UNIX line endings.\";\r\
    \n\
    \n:put \"\";\r\
    \n:put \"Hard coded source is file ipaddress.txt file.\";\r\
    \n\
    \n:put \"Hard coded destination is the blacklist address-list.\";\r\
    \n\
    \n:put \"Comment for imported entries is hard coded in the script.\";\r\
    \n\
    \n:put \"The ipaddress.txt file must be smaller than 4KB.\";\r\
    \n:put \"\";\r\
    \n##:put \"Removing all old address-list entries...\";\r\
    \n##/ip firewall address-list remove [/ip firewall address-list find list=blacklist];\r\
    \n:global content [/file get [/file find name=ipaddress.txt] contents] ;\r\
    \n:global contentLen [ :len \$content ] ;\r\
    \n:global lineEnd 0;\r\
    \n:global line \"\";\r\
    \n:global lastEnd 0;\r\
    \n:do {\r\
    \n      :set lineEnd [:find \$content \"\\n\" \$lastEnd ] ;\r\
    \n      :set line [:pick \$content \$lastEnd \$lineEnd] ;\r\
    \n      :set lastEnd ( \$lineEnd + 1 ) ;\r\
    \n      #If the line doesn't start with a hash then process and add to the list\r\
    \n      :if ( [:pick \$line 0 1] != \"#\" ) do={\r\
    \n      :local entry [:pick \$line 0 \$lineEnd ]\r\
    \n      :if ( [:len \$entry ] > 0 ) do={\r\
    \n         :put \"Removing \$entry from blacklist, if it exists\";\r\
    \n         /ip firewall address-list remove [find list=\"blacklist\" address=\$entry];\r\
    \n         :put \"Address being added is \$entry\";\r\
    \n         /ip firewall address-list add list=blacklist address=\$entry comment=\"Spammer\";\r\
    \n         }\r\
    \n      }\r\
    \n    } while (\$lineEnd < \$contentLen)\r\
    \n}"

</file>
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
