Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Windows Core (No GUI) ======

See also **[[https://www.sonoracomm.com/wiki/doku.php?do=search&id=hyper-v|more Hyper-V pages]]**

===== List Volumes (Drive Letters) =====

http://www.computerhope.com/issues/ch000854.htm

<file>
vol

wmic logicaldisk get name
</file>

===== Dismount a USB Flash Drive =====

==== fsutil ====

<file>
fsutil volume dismount VolumePathname
</file>

==== diskpart ====

Safely remove a USB disk from a windows server core installation:

  - On command prompt type ''diskpart''
  - At the ''diskpart'' prompt, type ''list volume'' noting the number of your desired volume
  - Type ''select volume x'' where 'x' is your USB storage device number
  - Then type ''remove all dismount'' and press 'enter'
  - Type ''exit'' to leave ''diskpart''

===== GUI Configuration Tools for Windows Core Installations =====

Windows 2008: http://coreconfig.codeplex.com/

Windows 2012: http://corefig.codeplex.com/

:!: This tool can only be run from the console of the system to be managed.

  - At a command prompt, switch to the folder that you created in step 3 of the installation instructions:
    * ''CD /D C:\Corefig''
  - For the first run, run:
    * ''CSCRIPT Start_corefig.wsf''
  - You may use the ''Start_corefig'' script on each run, but on successive runs you could use the following instead:
    * ''POWERSHELL .\COREFIG.PS1''

Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools