Virtual Architects Support Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== ATA over Ethernet (AoE) ======

{{:computing:storage:coraid_logo.png?nolink& |}}

AoE is a low overhead, non-routable storage protocol developed by Coraid.

http://www.coraid.com/

Coraid has a full line of storage products for SAN and virtualization projects.\\
\\

{{:computing:storage:starwind_logo.gif?nolink& |}}

Starwind also offers products and services with AoE support.

http://www.starwindsoftware.com/

\\
\\

===== AoE =====

http://en.wikipedia.org/wiki/ATA_over_Ethernet

The AoE protocol is open source and is widely included in various Linux distributions.

There is Windows driver support as well:

  * http://winaoe.org/
  * http://www.starwindsoftware.com/aoe-ataoverethernet-initiator

===== HOWTO =====

http://www.howtoforge.com/low-cost-san

http://www.linuxjournal.com/article/10780

http://www.howtoforge.com/ata_over_ethernet_debian_etch

===== Old Notes =====

==== Server Side (Target) ====

''vblade'' - user space AoE server
''kvblade'' - kernel space server

Performance difference? 

[[virtualization:xen_virtualization|Xen Virtualization]] - Mount AoE storage in Dom0 then share to DomU's

[[Linux Software RAID]] 1 to mirror two RAID 5 arrays

==== Client Side (Initiator) ====

Begin discovery of AoE targets:

<file>
modprobe aoe
</file>

No partition necessary - put filesystem on block device:

''/dev/etherd/e<shelfnum>.<slotnum>''

<file>
mkfs.ext3 /dev/etherd/e0.1
</file> 

Partitions can be used:

''/dev/etherd/e0.3p1''

Custom init script to bring up and shut down AoE storage (FAQ)

Admin Console uses port 6936

Install compiler:

<file>
yum install gcc gcc-c++ autoconf automake
</file>

Install aoetools (domU):

<file>
wget http://superb-west.dl.sourceforge.net/sourceforge/aoetools/aoetools-16.tar.gz
make install
</file>

Install vblade (dom0) to export storage:

<file>
wget http://internap.dl.sourceforge.net/sourceforge/aoetools/vblade-14.tgz
make 
make install
</file>


<file>
vi /etc/udev/rules.d/60-aoe.rules

# These rules tell udev what device nodes to create for [[aoe]] support.
# They may be installed along the following lines.  Check the section
# 8 udev manpage to see whether your udev supports SUBSYSTEM, and 
# whether it uses one or two equal signs for SUBSYSTEM and KERNEL.

# [[aoe]] char devices
SUBSYSTEM=="[[aoe]]", KERNEL=="discover",   NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="[[aoe]]", KERNEL=="err",        NAME="etherd/%k", GROUP="disk", MODE="0440"
SUBSYSTEM=="[[aoe]]", KERNEL=="interfaces", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="[[aoe]]", KERNEL=="revalidate", NAME="etherd/%k", GROUP="disk", MODE="0220"
SUBSYSTEM=="[[aoe]]", KERNEL=="flush",      NAME="etherd/%k", GROUP="disk", MODE="0220"

# [[aoe]] block devices     
KERNEL=="etherd*",       NAME="%k", GROUP="disk"
</file>

Install kernel source:

<file>
yum install kernel-xen-devel
</file>
Virtual Architects Support Wiki

User Tools

Site Tools

Page Tools
