Differences

This shows you the differences between two versions of the page.

--- voice:phones:yealink:yealink_prov [2014/12/13 14:59]
gcooper
+++ voice:phones:yealink:yealink_prov [2015/03/17 16:08] (current)
gcooper
@@ Line 2: / Line 2: @@
 **Yealink FTP Server**: ftp://ftp.yealink.com/RPS/T4X/
+===== DHCP =====
+**Windows DHCP Server**: http://www.3cx.com/sip-phones/dhcp-option-66/
+  * Not all Yealink firmware supports RPS
+  * RPS is supported on brand new phones
+  * You can also use DHCP Option 66 to pass a provisioning URL to a Yealink phone
+    * Be patient when reprovisioning as it sometimes takes a few minutes and the phone may reboot again
+    * Use the same URL as with RPS
+      * FreePBX Commercial EPM example URL: http://192.168.50.30:84
 ===== Yealink Redirection and Provisioning Service (RPS) =====
@@ Line 39: / Line 50: @@
 network.lldp.enable = 0
 network.vlan.dhcp_enable = 0
-network.vlan.internet_port_vid = 221
+network.vlan.internet_port_vid = nnn
 network.vlan.internet_port_priority = 5
 network.vlan.internet_port_enable = 1
 </file>
+:!: LLDP may confuse the phone VLAN functionality.  It did on a Zyxel GS1910-24HP switch.

Virtual Architects Support Wiki