Differences

This shows you the differences between two versions of the page.

--- voice:phones:grandstream:gxv3275 [2016/01/14 13:37]
gcooper created
+++ voice:phones:grandstream:gxv3275 [2022/02/10 08:40] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== Grandstream GXV3275 ======
+**Quick Guide**: http://www.grandstream.com/sites/default/files/Resources/GXV3275%20Quick%20User%20Guide_0.pdf
+**Admin Guide**: http://www.grandstream.com/sites/default/files/Resources/gxv3275_administration_guide.pdf
+**BLF Guide**: http://www.grandstream.com/sites/default/files/Resources/GXV32xx_broadworks_BLF_Guide.pdf
+**Firmware**: http://www.grandstream.com/support/firmware
   * Voice
@@ Line 6: / Line 14: @@
   * Wallmount Bracket
   * Video Conferencing
-  *
+===== Default Credentials =====
+^Username  |admin  |
+^Password  |admin  |
+===== Dialing Timer =====
+To adjust the timeout when dialing calls manually (offhook):
+**Phone Web Interface -> Account -> Account # -> Call Settings -> No Key Entry Timeout**
+===== Transfer Calls =====
+==== Attended (announced) ====
+  - While in the call, tap the ''More'' softkey and select the ''Transfer'' option.
+  - Select the ''Attended'' softkey located in the upper left-hand side of the screen.
+  - Enter the extension you wish to transfer to or select a contact from the list on the left hand side.
+  - Tap the ''Send'' softkey.
+  - After the call is answered and announced press the ''Transfer'' key to complete the transfer.
+Press the ''Cancel'' softkey to cancel the transfer at any time.
+==== Unattended (blind) ====
+  - While in the call, tap the More softkey and select the Transfer option.
+  - Select the Blind softkey located in the upper left-hand side of the screen.
+  - Enter the extension you wish to transfer to or select a contact from the list on the left hand side.
+  - Tap the Send softkey to complete the transfer.
+==== Directly to Voicemail ====
+Do an unattended transfer, but **preface the extension number with '*' (star or asterisk)**.  In other words just do a blind transfer to *nnnn where nnnn is the voicemail extension mailbox you want to transfer the caller into.
+===== Call Pickup =====
+==== Directed Call Pickup ====
+Asterisk uses <file>**<extension></file> to pick up a ringing extension.
+The Grandstream GXV3275 defaults to using the <file>**</file> BLF prefix.  However the default DialPlan does not allow dialing the default BLF prefix.  Go figure...
+:!: You must **modify the default dial** plan by adding <file>**xxx</file> (assuming 3-digit extension numbers) as a unique dial option.
+===== Intercom (internal call auto-answer) =====
+This is a per-extension setting.  Each extension can be different.
+If this feature is enabled, calls from internal extensions will auto-answer in speakerphone mode.
+===== Do Not Disturb (DND) =====
+To turn DND on or off:
+  - At the idle screen, touch and drag the status bar down then tap on ''System Settings''
+  - Tap on the ''DND'' icon
+===== Factory Default =====
+**Maintenance -> Upgrade -> Factory Reset** (bottom)

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools