User Tools

Site Tools


voice:phones:grandstream:grandstream_provisioning

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
voice:phones:grandstream:grandstream_provisioning [2015/08/23 16:57]
gcooper
voice:phones:grandstream:grandstream_provisioning [2022/02/21 10:56] (current)
gcooper
Line 5: Line 5:
 **P-Value Listing** (partial, version and phone dependent): http://www.voip-info.org/wiki/view/Grandstream+Configuration+Tool **P-Value Listing** (partial, version and phone dependent): http://www.voip-info.org/wiki/view/Grandstream+Configuration+Tool
  
-===== GXV3275 =====+===== GXP2130 =====
  
-:!: The latest firmware 1.0.3.37 does not seem to be compatible with the current commercial FreePBX EPM.+==== Distinctive Ring ==== 
 + 
 +https://forums.grandstream.com/t/custom-ring-tones/35433 
 + 
 +  * **On the PBX**, set a custom ''alert-info'' header on the **Inbound Route** 
 +    * **Alert-Info** to ''Custom'' 
 +    * **Custom Alert-Info** to ''custom-ring'' 
 +    * **Provisioning** 
 +      * ''P1488=custom-ring'' 
 +  * **On the phone**, under **Account -> Call Settings -> Match Incoming Caller ID** 
 +    * **Matching Rule** -> ''custom-ring'' 
 +    * **Ringtone** -> ''Custom Ringtone 3'' 
 +    * **Provisioning** 
 +      * ''P1489=3'' 
 + 
 +===== GXV3275 =====
  
 :!: Grandstream phones auto-reboot endlessly if they don't like the configuration files. :!: Grandstream phones auto-reboot endlessly if they don't like the configuration files.
  
-:!: Try performing a factory reset if you experience provisioning problems.+:!: Try performing a factory reset if you experience provisioning problems or follow the firmware update procedure:
  
-:!: Perform a factory reset after any firmware update.+==== Firmware Update ==== 
 + 
 +  - Perform a factory reset 
 +  - Update the firmware (may take a while) 
 +  - **Troubleshooting**: Delete the provisioning template 
 +  - **Troubleshooting**: Create a new provisioning template 
 +  - Rebuild the config files 
 +  - Do another factory reset
  
 ==== VLAN Configuration ==== ==== VLAN Configuration ====
Line 19: Line 41:
 You can use: You can use:
  
-  * Provisioning config file +  * **Provisioning** 
-    * ''P51=<vlid>'' (VLAN Tag Ethernet) +    * Config file 
-  * Manual configuration+      * Basefile edit 
 +    * ''P51=<vlid>'' 
 +      * VLAN Tag (Ethernet) 
 +    * ''P1685=1'' 
 +      * Default Transfer Mode to Attended 
 +  * **Manual** 
 +    * Web interface configuration
  
-:!: DHCP VLAN discovery does not seem to work with the current firmware in FreePBX EPM.+:!: DHCP VLAN discovery does not seem to work but Option 66 does.
  
     * DHCP Option 66 (''tftp-server-name'')     * DHCP Option 66 (''tftp-server-name'')
     * DHCP Option 132 (''vlan-id'')     * DHCP Option 132 (''vlan-id'')
-    * Enable DHCP VLAN in config file (''P8300=1'')+    * Enable DHCP VLAN in config file (''P8300=1'', or ''P8038=1'' in older firmware) 
 + 
 +{{ :voice:phones:grandstream:freepbx_epm_basefile_gs.png?750 |}}
  
 Here is an initial phone boot from the perspective of the PBX (TFTP server) with the **phone booting on data VLAN**. Here is an initial phone boot from the perspective of the PBX (TFTP server) with the **phone booting on data VLAN**.
voice/phones/grandstream/grandstream_provisioning.1440370662.txt.gz · Last modified: 2015/08/23 16:57 by gcooper