Differences

This shows you the differences between two versions of the page.

--- voice:phones:grandstream:grandstream_provisioning [2015/08/23 16:28]
gcooper
+++ voice:phones:grandstream:grandstream_provisioning [2022/02/21 10:56] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== Grandstream Phone Provisioning Notes ======
-http://www.grandstream.com/index.php/support/tools
+**Tools**: http://www.grandstream.com/index.php/support/tools
-===== GXV3275 =====
+**P-Value Listing** (partial, version and phone dependent): http://www.voip-info.org/wiki/view/Grandstream+Configuration+Tool
-:!: Only the latest firmware 1.0.3.37 supports DHCP VLAN discovery.  You may need to manually configure the VLAN.
+===== GXP2130 =====
-:!: The latest firmware 1.0.3.37 does not seem to be compatible with the current commercial FreePBX EPM.
+==== Distinctive Ring ====
+https://forums.grandstream.com/t/custom-ring-tones/35433
+  * **On the PBX**, set a custom ''alert-info'' header on the **Inbound Route**
+    * **Alert-Info** to ''Custom''
+    * **Custom Alert-Info** to ''custom-ring''
+    * **Provisioning**
+      * ''P1488=custom-ring''
+  * **On the phone**, under **Account -> Call Settings -> Match Incoming Caller ID**
+    * **Matching Rule** -> ''custom-ring''
+    * **Ringtone** -> ''Custom Ringtone 3''
+    * **Provisioning**
+      * ''P1489=3''
+===== GXV3275 =====
 :!: Grandstream phones auto-reboot endlessly if they don't like the configuration files.
-:!: Try performing a factory reset if you experience provisioning problems.
+:!: Try performing a factory reset if you experience provisioning problems or follow the firmware update procedure:
+==== Firmware Update ====
+  - Perform a factory reset
+  - Update the firmware (may take a while)
+  - **Troubleshooting**: Delete the provisioning template
+  - **Troubleshooting**: Create a new provisioning template
+  - Rebuild the config files
+  - Do another factory reset
+==== VLAN Configuration ====
+You can use:
+  * **Provisioning**
+    * Config file
+      * Basefile edit
+    * ''P51=<vlid>''
+      * VLAN Tag (Ethernet)
+    * ''P1685=1''
+      * Default Transfer Mode to Attended
+  * **Manual**
+    * Web interface configuration
+:!: DHCP VLAN discovery does not seem to work but Option 66 does.
+    * DHCP Option 66 (''tftp-server-name'')
+    * DHCP Option 132 (''vlan-id'')
+    * Enable DHCP VLAN in config file (''P8300=1'', or ''P8038=1'' in older firmware)
-:!: Perform a factory reset after any firmware update.
+{{ :voice:phones:grandstream:freepbx_epm_basefile_gs.png?750 |}}
 Here is an initial phone boot from the perspective of the PBX (TFTP server) with the **phone booting on data VLAN**.

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools