Differences

This shows you the differences between two versions of the page.

--- voice:pbx:grandstream_pbx [2022/10/26 11:37]
gcooper
+++ voice:pbx:grandstream_pbx [2022/10/26 15:01] (current)
gcooper
@@ Line 290: / Line 290: @@
 {{ :voice:gateway:grandstream_monitor_vm_2.png?direct&728 |Monitor Shared Mailbox}}
-==== Night Mode ====
+===== Night Mode =====
-FIXME Needs testing!
+FIXME Needs testing! Problems!
+https://forums.grandstream.com/t/night-mode-toggle-blf-on-ucm62xx-resolved/39206
+http://onthewire.us/2019/10/11/grandstream-ucm-day-night-mode-and-time-holiday-mode/
   - Go to ''Inbound Routes''
@@ Line 299: / Line 303: @@
   - ''Save'' & ''Apply''
   - Go back to ''Inbound Routes'' and edit your desired/normal inbound route
-  - Enable ''Route-Level Inbound Mode'' ( this button is somewhere in the middle of the page )
+  - Select ''Enable Route-Level Inbound Mode'' in the middle of the page
-  - Enter Any code you like for ''Inbound Mode Suffix'' , for example enter ''80''.
+  - Enter Any code you like for ''Inbound Mode Suffix'', for example enter ''80''
-  - Enable ''Inbound Multiple Mode''.
+  - Enable ''Inbound Multiple Mode''
-  - Setup your Mode 1 route for night mode IVR.
+  - Setup your ''Mode 1'' route for night mode IVR/destination
-  - Save & Apply.
+  - ''Save'' & ''Apply''
-  - Go to your Deskphone, Setup BLF Button with same value as “Inbound Mode Suffix”, ( I used 80 )
+  - Go to your deskphone and configure a BLF button with same value as ''Inbound Mode Suffix'', for example ''80''
 ===== Troubleshooting =====
@@ Line 313: / Line 317: @@
 If you enable CallerID, but the analog line doesn't have that service, you may not get incoming calls.
+==== Transferring Calls to External Numbers ====
+**PBX Settings -> SIP Settings -> ToS -> RTP Keepalive -> 5**
+{{ :voice:pbx:grandstream_ucm_forward_to_external.png?direct&600 |Transferring to External Numbers}}

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools