Virtual Architects Support Wiki

User Tools

Site Tools

You are here: start » voice » pbx » freepbx » freepbx_upgrade
Trace:
voice:pbx:freepbx:freepbx_upgrade

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
voice:pbx:freepbx:freepbx_upgrade [2017/12/26 10:46]
gcooper 		voice:pbx:freepbx:freepbx_upgrade [2023/10/26 13:33] (current)
gcooper
Line 1: Line 1:
 ====== Upgrading a FreePBX Distro ====== ====== Upgrading a FreePBX Distro ======
 +
 +**Downloads**: https://downloads.freepbxdistro.org/ISO/
 +
 +**Upgrade In-Place**: https://wiki.freepbx.org/display/FOP/FreePBX+16+Version+Upgrade+Module
 +
 +:!: **Take a VM snapshot first!**
  
 ===== SNG7 ===== ===== SNG7 =====
Line 8: Line 14:
 cat /etc/schmooze/pbx-version cat /etc/schmooze/pbx-version
 </file> </file>
 +
 +==== GUI Upgrade ====
 +
 +:!: You are probably better off using the CLI, especially if there are many updates.
 +
 +  - Update PBX and OS Modules
 +    - First use **Module Admin -> Module Updates**
 +    - Then use **Module Admin -> System Updates**
 +  - Reboot the PBX
 +    - **System Admin -> Power Options -> Reboot**
  
 ==== Manual Upgrade ==== ==== Manual Upgrade ====
 +
 +Upgrade all FreePBX modules:
  
 <file> <file>
-fwconsole ma installall +fwconsole ma upgradeall && fwconsole r
-fwconsole r +
-yum -y update +
-reboot -h now+
 </file> </file>
 +
 +Or, if you want to install all new modules or reinstall any uninstalled modules:
 +
 +<file>
 +fwconsole ma installall && fwconsole r
 +</file>
 +
 +Finally, we update the host OS and reboot:
 +
 +<file>
 +yum -y update && yum clean all && reboot
 +</file>
 +
 +==== Changing Major Asterisk Versions ====
 +
 +<file>
 +asterisk-version-switch
 +</file>
 +
 +==== Upgrade from FreePBX 10.13.66 ====
 +
 +https://wiki.freepbx.org/display/PPS/Upgrading+from+FreePBX+10.13.66+to+SNG7
  
 ===== FreePBX Distro 10.13.66 or Older ===== ===== FreePBX Distro 10.13.66 or Older =====
Line 105: Line 142:
 ===== Migrate to New Hardware ===== ===== Migrate to New Hardware =====
  
-FIXME Needs verification of functionality.+**Backup and Restore** of the same FreePBX version seems to work great. 
 + 
 +:!: You will need to **activate** the FreePBX Distro Deployment on the new PBX. 
 + 
 +==== Legacy ====
  
 **Upgrade 10.13.66 to SNG7**: https://wiki.freepbx.org/display/PPS/Upgrading+from+FreePBX+10.13.66+to+SNG7 **Upgrade 10.13.66 to SNG7**: https://wiki.freepbx.org/display/PPS/Upgrading+from+FreePBX+10.13.66+to+SNG7
Line 111: Line 152:
 Allows you to take **any FreePBX based system on version 2.9 or newer** and have it **migrate all the PBX settings to a new system**.  This includes systems such as **Elastix, PBXinaFlash or any other FreePBX based system including FreePBX Distro** systems and manually installed systems on unsupported operating systems. Allows you to take **any FreePBX based system on version 2.9 or newer** and have it **migrate all the PBX settings to a new system**.  This includes systems such as **Elastix, PBXinaFlash or any other FreePBX based system including FreePBX Distro** systems and manually installed systems on unsupported operating systems.
  
-https://www.freepbx.org/home2freepbx-conversion-tool/ +**Demo Video and Howto**: https://www.freepbx.org/home2freepbx-conversion-tool/
- +
-https://wiki.freepbx.org/display/PPS/Elastix+and+PBXinaFlash+to+FreePBX+Distro+Conversion+Tool+
  
 :!: Note that any TRUNKS will be set to ''disabled'' on the NEW machine! :!: Note that any TRUNKS will be set to ''disabled'' on the NEW machine!
voice/pbx/freepbx/freepbx_upgrade.1514310386.txt.gz · Last modified: 2017/12/26 10:46 by gcooper

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki