Differences

This shows you the differences between two versions of the page.

--- voice:gateway:grandstream_ata [2016/08/06 15:52]
gcooper
+++ — (current)
@@ Line 1: / Line 1: @@
-====== Grandstream Analog Gateways and ATAs ======
-===== GXW-400x =====
-  * 4 or 8 Ports **FXS**
-  * Router
-  * 2x 10/100 Ethernet
-===== GXW-410x =====
-http://www.freepbx.org/forum/freepbx/tips-and-tricks/how-to-grandstream-gxw-4104-setup
-  * 4 or 8 Ports **FXO**
-  * 2x 10/100 Ethernet
-===== HT70x ATA =====
-^Model  ^Note                ^
-|HT502  |2 FXS Ports, Router |
-|HT503  |1 FXS, 1FXO, Router |
-|HT701  |1 FXS Port          |
-|HT702  |2 FXS Ports         |
-|HT704  |4 FXS Ports         |
-  * DHCP client by default
-  * Factory reset
-    * Press reset button for 7 seconds
-  * Voice menu
-    * Connect analog phone or butt set to FXS port
-    * Dial **three asterisks** for voice menu
-      * Then dial ''02'' to hear current IP address
-  * Default password
-    * ''admin''
-==== Configuration ====
-:!: Start from **factory default** settings and use a web browser to access the current IP address.
-=== Basic Settings ===
-  * Time Zone
-=== FXS Settings ===
-  * **Active** = ''yes''
-  * **Primary SIP Server** = ''inbound23.vitelity.net''
-  * **Outbound Proxy** = ''outbound.vitelity.net''
-  * **SIP User ID** = ''<sub_acct_user_id>''
-  * **Authenticate ID** = ''<sub_acct_user_id>''
-  * **Authenticate Password** = ''<sub_acct_password>''
-  * **Apply** and **Reboot**

Virtual Architects Support Wiki