Differences

This shows you the differences between two versions of the page.

--- voice:ata:pap2 [2015/04/11 10:11]
gcooper
+++ voice:ata:pap2 [2015/04/11 10:17] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== Cisco/Linksys PAP2T ATA Connection Notes ======
-Mostly see here: http://wiki.voip.ms/article/Cisco_Linksys_PAP2
+**Mostly see here**: http://wiki.voip.ms/article/Cisco_Linksys_PAP2
-Also see here: **[[voice:ata:spa2100|Linksys/Sipura SPA-2100 ATA Connection Notes]]**
+**Also see here**: [[voice:ata:spa2100|Linksys/Sipura SPA-2100 ATA Connection Notes]]
 ===== Seven Digit Dialing =====
-Modify the Dialplan section in the Line1 (or Line2) settings by adding ''<:520>'':
+If you use a SIP trunk provider that requires 10 digits, modify the Dialplan in the Line1 (or Line2) settings by adding ''<:520>'' to the 7-digit section:
 <file>
@@ Line 13: / Line 13: @@
 </file>
-:!: In this example, ''520'' is our local 7-digit area code.
+:!: In this example, we need ''520'' (our local area code) added to dial 7-digit calls.
 <file>
@@ Line 21: / Line 21: @@
 ===== Audio Quality and CODEC =====
-For maximum bandwidth savings, use ''g.729a''.
+For maximum bandwidth savings, use ''g.729a''.  Otherwise, choose (the default) ''g.711u'' (uncompressed) for best audio quality.  It's roughly 24Kbps vs. 92Kbps.
-Otherwise, choose (the default) ''g.711u'' (uncompressed) for best audio quality.
 Also, be sure to set the ''RTP Packet Size'' to ''0.020'' on the SIP tab.

Virtual Architects Support Wiki