Differences

This shows you the differences between two versions of the page.

--- voice:ata:pap2 [2015/04/11 10:02]
gcooper created
+++ voice:ata:pap2 [2015/04/11 10:17] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== Cisco/Linksys PAP2T ATA Connection Notes ======
-Mostly see here: http://wiki.voip.ms/article/Cisco_Linksys_PAP2
+**Mostly see here**: http://wiki.voip.ms/article/Cisco_Linksys_PAP2
-Also see here: **[[voice:ata:spa2100|Linksys/Sipura SPA-2100 ATA Connection Notes]]**
+**Also see here**: [[voice:ata:spa2100|Linksys/Sipura SPA-2100 ATA Connection Notes]]
+===== Seven Digit Dialing =====
+If you use a SIP trunk provider that requires 10 digits, modify the Dialplan in the Line1 (or Line2) settings by adding ''<:520>'' to the 7-digit section:
+<file>
+|<:520>[2-9]xxxxxx|
+</file>
+:!: In this example, we need ''520'' (our local area code) added to dial 7-digit calls.
+<file>
+(*xx|[3469]11|0|00|<:520>[2-9]xxxxxx|1xxx[2-9]xxxxxxS0|xxxxxxxxxxxx.)
+</file>
+===== Audio Quality and CODEC =====
+For maximum bandwidth savings, use ''g.729a''.  Otherwise, choose (the default) ''g.711u'' (uncompressed) for best audio quality.  It's roughly 24Kbps vs. 92Kbps.
+Also, be sure to set the ''RTP Packet Size'' to ''0.020'' on the SIP tab.

Virtual Architects Support Wiki