Differences

This shows you the differences between two versions of the page.

--- virtualization:xenserver:xenserver_remote [2015/03/28 10:15]
gcooper
+++ virtualization:xenserver:xenserver_remote [2016/10/18 18:10] (current)
gcooper
@@ Line 15: / Line 15: @@
 ===== Remote XenCenter =====
-:!: You can get partial functionality by simply forwarding port 443 into the XenServer.
+:!: For best security, you should limit access to your remote XenServer by source IP address in the firewall at the remote site.
-The easiest way I've found to access the console of a VM running on a XenServer behind NAT is:
+You can get **partial functionality** by simply forwarding TCP port 443 into the remote XenServer, but not console access (XenServer or VM).  Even if you forward a non-standard port (i.e. 4443) in to port 443 on the XenServer, you can still add the remote server to XenCenter:
+''remote.host.or.ip:4443''
+===== Remote Console =====
+<note tip>A **VPN connection** makes the following workaround unnecessary!</note>
+Without a VPN connection, the easiest way I've found to access the console of a VM running on a XenServer behind NAT is:
   - Enable remote SSH access directly to the XenServer

Virtual Architects Support Wiki