Virtual Architects Support Wiki

User Tools

Site Tools

You are here: start » quick_guide » vpn_l2tp_ios
Trace:
quick_guide:vpn_l2tp_ios

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
quick_guide:vpn_l2tp_ios [2016/05/14 11:32]
jcooper created 		quick_guide:vpn_l2tp_ios [2016/12/05 09:44] (current)
gcooper
Line 1: Line 1:
-====== L2TP VPN Windows Client setup ====== +====== L2TP VPN iOS Client setup ======
- +
-====== Windows 7 ====== +
- +
-https://www.youtube.com/watch?v=tpgEqzwj_OQ Start at 1:50 for Windows 7 client setup +
- +
-  * Control Panel -> Network and Sharing Center  +
-  * Setup a New Connection or Network +
-  * Connect to a Workplace -> Next +
-  * Leave at ''No create a new connection'' -> Next if asked +
-  * Click ''Use my Internet connection'' +
-  * ''Internet Address'' is hostname or IP address of L2TP server given to you by your administrator +
-  * ''Destination Name'' is your label for the connection +
-  * Check ''Don't connect now just set it up so I can connect later'' -> Next +
-  * Type in the username and password given to you by your administrator check ''Save'' if desired -> Create -> Close +
-  * Click ''Change Adapter Settings'' +
-  * Right Click the adapter you just created -> Properties +
-  * On Security tab Type of VPN select Layer 2... +
-  * Uncheck ''Challenge Handshake Authentication...'' -> Advanced +
-  * Check ''Use preshared key'' and enter the Secret given to you by your administrator -> OK +
-  * You can click ''Connect'' from here +
- +
-:!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect. +
- +
-====== Windows 8.1 ====== +
- +
-  * Control Panel -> Network and Sharing Center  +
-  * Click ''Setup a New Connection or Network'' +
-  * Connect to a Workplace -> Next +
-  * Leave at ''No create a new connection'' -> Next if asked +
-  * Click ''Use my Internet connection'' +
-  * ''Internet Address'' is hostname or IP address of L2TP server given to you by your administrator +
-  * ''Destination Name'' is your label for the connection -> Create +
-  * Click ''Change Adapter Settings'' +
-  * Right Click the adapter you just created -> Properties +
-  * On Security tab Type of VPN select Layer 2... +
-  * For Data encryption select ''Require encryption (disconnect...'' +
-  * Check ''Allow these protocols'' +
-  * Check ''Microsoft CHAP Version 2 (MS-CHAP v2)'' +
-  * Click ''Advanced'' enter the Secret given to you by your administrator -> OK -> OK +
- +
-:!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect. +
- +
-====== Windows 10 ====== +
- +
-  * Control Panel -> Network and Sharing Center  +
-  * Click ''Setup a New Connection or Network'' +
-  * Connect to a Workplace -> Next +
-  * Leave at ''No create a new connection'' -> Next if asked +
-  * Click ''Use my Internet connectio''n +
-  * Internet Address is hostname or IP address of L2TP server given to you by your administrator +
-  * Destination Name is your label for the connection -> Create +
-  * Click ''Change Adapter Settings'' +
-  * Right Click the adapter you just created -> Properties +
-  * On Security tab Type of VPN select ''Layer 2...'' +
-  * For Data encryption select ''Require encryption (disconnect...'' +
-  * Check ''Allow these protocols'' +
-  * Check ''Microsoft CHAP Version 2 (MS-CHAP v2)'' +
-  * Click Advanced enter the Secret given to you by your administrator -> OK -> OK+
  
 +  * On the Home Screen tap ''Settings'' 
 +  * Tap ''General'' on the left then ''VPN'' on the right (you may have to scroll down)
 +  * Tap ''Add VPN Configuration...''
 +  * Tap ''Type'' -> ''L2TP'' -> ''Back''
 +  * For ''Description'' enter your chosen name for VPN
 +  * ''Server'' is hostname or IP address of L2TP server given to you by your administrator
 +  * ''Account'' is username given to you by your administrator
 +  * Enter ''Password'' given to you by your administrator if you want it to be saved
 +  * In ''Secret'' enter the Secret given to you by your administrator
 +  * Tap ''Done''
 +  
 :!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect. :!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect.
  
 ====== Connecting ====== ====== Connecting ======
  
-  * Click the Network icon in the System Tray +  * On the Home Screen tap ''Settings''  
-  * Click the L2TP connection you created +  * Tap ''VPN'' 
-  * Click ''Connect'' enter login and password from administrator if challenged+  * Tap the VPN you created to select 
 +  * At ''Status'' drag the button to the right 
  
 :!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect. :!: It is important that you disconnect as soon as you are done using the VPN.  All Internet traffic will go through the VPN until you disconnect.
Line 71: Line 25:
 ====== Disconnecting ====== ====== Disconnecting ======
  
-  * Click the Network icon in the System Tray +  * On the Home Screen tap ''Settings''  
-  * Click the L2TP connection you created +  * Tap ''VPN'' 
-  * Click ''Disconnect''+  * Tap the VPN you created to select 
 +  * At ''Status'' drag the button to the left 
 + 
 +<note tip>We suggest [[https://www.parallels.com/products/ras/download/client/|Parallels Client]] as Remote Desktop client available for free in Google Play Store and Apple App Store.</note>
quick_guide/vpn_l2tp_ios.1463247149.txt.gz · Last modified: 2016/05/14 11:32 by jcooper

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki