Differences

This shows you the differences between two versions of the page.

--- quick_guide:freepbx_ucp [2016/05/07 10:59]
gcooper
+++ quick_guide:freepbx_ucp [2022/09/27 13:43] (current)
jcooper
@@ Line 2: / Line 2: @@
 http://wiki.freepbx.org/display/FPG/User+Control+Panel-Follow+Me
+https://wiki.freepbx.org/display/FPG/Follow+Me+User+Guide
 http://wiki.freepbx.org/display/FPG/Contact+Manager+Module
@@ Line 14: / Line 16: @@
   * **Do Not Disturb**
-:!: On FreePBX 2.11 and older systems, your extension number is your username and your PIN is your password.
-:!: On FreePBX 12 and newer systems, your username and password are maintained separately and you should receive an e-mail message with your login details.
+:!: On FreePBX 12 and **newer systems, your username and password are maintained separately and you should receive an e-mail message with your login details**.
-Please **change your password** by clicking on the 'Gear' icon in the upper right after logging in the first time.
+:!: Please **change your password** by clicking on the 'Gear' icon in the lower left after logging in the first time.
-<note warning>You must use **HTTPS** protocol to access the UCP or you will see a bold red error message in the UCP web interface.
+===== Access the UCP =====
-https://pbx.yourdomain.tld/ucp/
+<note important>On upgraded systems, users may not automatically have permission to access the UCP.  Modify the **All Users** group to include all desired users, or edit each individual user and set your preference on the **UCP tab**.</note>
-{{:quick_guide:ucp_error_no_https.png?600 |Error with No HTTPS}}
+<note important>The UCP is generally **only accessible from your LAN** (local area network).  In other words, the UCP is only available from **inside your firewall**.  If external access is needed, the firewall can be adjusted.</note>
-</note>
+<file>
+https://pbx.yourdomain.tld/ucp
+</file>
+or by your PBX IP address
+<file>
+https://192.168.1.30/ucp
+</file>
+<note important>**You must use HTTPS protocol to access the UCP** or you will see a bold red error message in the UCP web interface.
+{{ :quick_guide:ucp_error_no_https.png?600 |Error with No HTTPS}}</note>
 ===== FollowMe =====
+<note tip>FollowMe is an effective method to route incoming calls to your mobile (or other) number if you are not at your desk.</note>
 External numbers should be added to the FollowMe List in the following format:
 <file>
-NXXNXXXXXX
+NXXNXXXXXX#
 </file>
-which is 1 + area code + number.
+which is 1 + area code + number + #.

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools