Differences

This shows you the differences between two versions of the page.

--- networking:switch:cisco_switch [2013/07/04 17:06]
gcooper
+++ networking:switch:cisco_switch [2013/10/22 11:30] (current)
gcooper
@@ Line 21: / Line 21: @@
   - Confirm that you want to reload the switch, and your switch configuration is almost clean.
-It's almost clean, but not quite. Most people forget to clear any VLAN information they've created for their switches. Depending on the hardware version of your switch and the software version of your OS, the command for this varies. For more information, check out Cisco's "Resetting Catalyst Switches to Factory Defaults" documentation, which walks you through the commands for clearing VLAN information from your switch.
+It's almost clean, but not quite. Most people forget to clear any VLAN information they've created for their switches. Depending on the hardware version of your switch and the software version of your OS, the command for this varies.
+<file>
+show vlan
+dir flash:
+dir cat4000_flash:
+dir const_nvram:
+delete flash:vlan.dat
+erase cat4000_flash:
+reload
+</file>
 ===== Upgrade Firmware =====

Virtual Architects Support Wiki