Differences

This shows you the differences between two versions of the page.

--- networking:router:cisco_678 [2012/10/01 15:38]
gcooper
+++ networking:router:cisco_678 [2013/09/13 10:35] (current)
gcooper
@@ Line 52: / Line 52: @@
 :!: All things in ''<brackets>'' must be changed for each different site.
-:!: Warning: this device must be disconnected from the phone line before this configuration is installed.  Once the final reboot command is given, it may be re-connected.
+:!: Warning: this device must be disconnected from the phone line before this configuration is installed.  Once the final reboot command is given, it may be reconnected.
 Erase current configuration and reboot:
@@ Line 176: / Line 176: @@
 <file>
 cbos# set nat outside ip <static-IP-of-router>
-cbos# set nat entry add <inside-IP-of-server> <port> <static-IP-of-router> <tcp-or-udp>
+cbos# set nat entry add <inside-IP-of-server> <port> <static-IP-of-router> <port> <tcp-or-udp>
-cbos# set nat entry delete <inside-IP-of-server> <port> <static-IP-of-router> <tcp-or-udp>
+cbos# set nat entry delete <inside-IP-of-server> <port> <static-IP-of-router> <port> <tcp-or-udp>
 cbos# set nat enable
 cbos# set nat disable

Virtual Architects Support Wiki