Virtual Architects Support Wiki

User Tools

Site Tools

You are here: start » networking » monitoring » wattbox
Trace:
networking:monitoring:wattbox

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
networking:monitoring:wattbox [2015/08/28 15:27]
jcooper 		networking:monitoring:wattbox [2015/08/29 17:11] (current)
jcooper
Line 5: Line 5:
 **Documentation**: http://www.av-iq.com/avcat/images/documents/dataSheet/2312.pdf **Documentation**: http://www.av-iq.com/avcat/images/documents/dataSheet/2312.pdf
  
-Evaluating the WattBox WB-200-IPCE-3 I found it to be a capable remote controlled surge suppressor.  +Evaluating the WattBox WB-200-IPCE-3 I found it to be a capable remote controlled per port surge suppressor.  
  
-It has the ability to use ICMP to determine if a device/Internet is accessible and do an auto power off/on of a port.  I.E. reboot Cable Modem/DSL to attempt reconnect of Internet.+  * It has the ability to use ICMP to determine if a device/Internet is accessible and do an auto power off/on of a port.  I.E. reboot Cable Modem/DSL to attempt reconnect of Internet.
  
-You can also schedule unattended power cycle of the ports.+  * You can schedule unattended power cycle of the ports.
  
-It also can send email alerts on conditions.+  * It also can send email alerts on conditions. 
 + 
 +:!: I was not able to make the email option work on Zimbra or Gmail accounts.  Does not appear to support encryption.  It did work with mail.sonoracomm.com.
  
 ===== Setup ===== ===== Setup =====
  
 http://www.dailymotion.com/video/x16znav_wattbox-wb-200-ipce-3-tutorial_tech http://www.dailymotion.com/video/x16znav_wattbox-wb-200-ipce-3-tutorial_tech
 +
 +:!: Default credentials User:admin Password: <none, leave "Password" field blank>
  
   * The "Power on Delay" settings are connected to the auto power cycle function triggered by the result of the ICMP availability of a host.  The delay is the amount of time the port will be without power.  Handy for devices that need to be in a certain condition (booted up) before another device comes on.   * The "Power on Delay" settings are connected to the auto power cycle function triggered by the result of the ICMP availability of a host.  The delay is the amount of time the port will be without power.  Handy for devices that need to be in a certain condition (booted up) before another device comes on.
Line 24: Line 28:
  
 :!: The videos and documentation will tell you to install the configuration software. This is to find the device on your network. Determine the devices IP address via DHCP log etc. and use your browser making the install unnecessary. :!: The videos and documentation will tell you to install the configuration software. This is to find the device on your network. Determine the devices IP address via DHCP log etc. and use your browser making the install unnecessary.
- 
  
   * WattBox has their own DynDNS system so you can remotely access the device via HTTP (port configurable) if you forward the port to your WattBox.   * WattBox has their own DynDNS system so you can remotely access the device via HTTP (port configurable) if you forward the port to your WattBox.
 +
 +===== Firmware Updates =====
 +
 +:!: Firmware updates can only be done with the configuration software.
 +
 +https://www.onaisle8.com/wcsstore/ExtendedSitesCatalogAssetStore/attachments/documents/PowerManagement/SoftwareAndFirmware/WB-IP_FirmwareUpdateInstructions.pdf
      
 ===== OVRC ===== ===== OVRC =====
networking/monitoring/wattbox.1440797267.txt.gz · Last modified: 2015/08/28 15:27 by jcooper

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki