Differences

This shows you the differences between two versions of the page.

--- computing:storage:lsi:megaraid_monitor [2013/01/21 16:29]
gcooper
+++ computing:storage:lsi:megaraid_monitor [2018/11/01 10:55] (current)
gcooper
@@ Line 1: / Line 1: @@
 ====== Monitoring LSI SAS RAID Controllers on Linux ======
-FIXME This page needs updating.
+See also **[[computing:storage:lsi:megaraid|LSI MegaRAID]]**
-Cheat Sheet:
+**Cheat Sheet**: http://tools.rapidsoft.de/perc/
-LSI MegaRAID SAS User's Guide:
+**LSI MegaRAID SAS User's Guide**: http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/MegaRAID_SAS_SW_UG_51530-00_RevI.pdf
 This configuration uses ''cron'' and the MegaCLI RAID configuration utility to monitor a Linux server with a newer LSI SAS RAID controller.
@@ Line 20: / Line 20: @@
 <file>
-vim /etc/ssmtp/ssmtp.conf
+vi /etc/ssmtp/ssmtp.conf
 root=admin@yourdomain.com
@@ Line 41: / Line 41: @@
 ==== Install the MegaCLI Utility ====
-Log in as 'root', then:
+See also **[[computing:storage:lsi:megaraid|LSI MegaRAID]]**
-<file>
+==== cron ====
-mkdir ~/MegaCLI
-cd ~/MegaCLI
-wget http://www.lsi.com/downloads/Public/MegaRAID%20Common%20Files/8.07.06_MegaCLI.zip
-unzip 8.07.06_MegaCLI.zip
-rpm -Uvh Linux/MegaCli-8.07.06-1.noarch.rpm
-</file>
-==== CRON ====
-I added this to my ''/etc/crontab'' to run the script every 10 minutes:
+Added to ''/etc/crontab'' to run the script every 10 minutes:
 <file>
@@ Line 63: / Line 54: @@
 ==== raid-status-megacli.sh ====
-Place this script in the ''/root'' directory.
+Place this script in the ''/root'' directory and make it executable:
+<file>
+chmod +x /root/raid-status-megacli.sh
+</file>
 You will want to edit the variables to fit your needs.
@@ Line 70: / Line 65: @@
 #!/bin/bash
 #
-# raidstatus.sh - Gene Cooper <gcooper@sonoracomm.com>
+# raid-status-megacli.sh - Gene Cooper <gcooper at sonoracomm.com>
 #
 # For newer LSI RAID controllers
 #
 # Uses MegaCLI utility and sendmail command and should be run from cron
-#
+# Sender of e-mail warnings
+# For WHMCS Ticket System, use the contact address here for automatic account assignment
+FROM='"RAID Status" <user@domain.com>'
 # Subject of e-mail warning
-SUBJECT='RAID Array Failure on $HOSTNAME'
+SUBJECT="RAID Array Failure on `hostname`"
 # Recipient of e-mail warnings
-ADMIN='you@yourdomain.com'
+ADMIN='"Your Name" <you@yourdomain.com>'
 # RAID utility check command
@@ Line 92: / Line 90: @@
 nice -n 19 ${COMMAND} > $STATUS
-# check for error
+# Comment this section and run manually to test mail sending
+# Check for error
 if [ -z "$(grep "^State.*: Degraded$" $STATUS | awk '{print $NF}')" ]; then
   exit 0
 fi
-# send mail
+# Send mail
 /usr/sbin/sendmail -t -i <<EOF
 Date: $(date)
 To:  $ADMIN
 Subject: $SUBJECT
-From: $ADMIN
+From: $FROM
 $(cat $STATUS)
@@ Line 108: / Line 107: @@
 EOF
 exit
+</file>
+Here is someone else's script for ideas:
+<file>
+#!/bin/sh
+CONT="a0"
+STATUS=0
+MEGACLI=/opt/MegaRAID/MegaCli/MegaCli64
+echo -n "Checking RAID status on "
+hostname
+for a in $CONT
+ do
+   NAME=`$MEGACLI -AdpAllInfo -$a |grep "Product Name" | cut -d: -f2`
+   echo "Controller $a: $NAME"
+   noonline=`$MEGACLI PDList -$a | grep Online | wc -l`
+   echo "No of Physical disks online : $noonline"
+   DEGRADED=`$MEGACLI -AdpAllInfo -a0  |grep "Degrade"`
+   echo $DEGRADED
+   NUM_DEGRADED=`echo $DEGRADED |cut -d" " -f3`
+   [ "$NUM_DEGRADED" -ne 0 ] && STATUS=1
+   FAILED=`$MEGACLI -AdpAllInfo -a0  |grep "Failed Disks"`
+   echo $FAILED
+   NUM_FAILED=`echo $FAILED |cut -d" " -f4`
+   [ "$NUM_FAILED" -ne 0 ] && STATUS=1
+ done
+exit $STATUS
 </file>

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools