Differences

This shows you the differences between two versions of the page.

--- computing:storage:clonezilla_usb_restore [2014/11/22 16:07]
jcooper created
+++ computing:storage:clonezilla_usb_restore [2020/07/20 11:34] (current)
jcooper
@@ Line 1: / Line 1: @@
 ===== Create Bootable CloneZilla Image Restore USB Drive =====
+http://clonezilla.org/liveusb.php
+===== Tuxboot Method =====
 :!: Download the "Tuxboot" utility to create a bootable CloneZilla Live USB drive.
@@ Line 5: / Line 10: @@
 http://tuxboot.org/
-  - Use a USB drive that is large enough to hold your Restore image compressed.  Typically the image will be a little over half as large as the used space on the drive.
+  - Use a USB drive that is large enough to hold your Restore image.  Typically the image will be a little over half as large as the used space on the drive.
   - Format the USB drive using FAT32 ALL DATA ON THE DRIVE WILL BE ERASED!!!
   - Run the downloaded Tuxboot utility
@@ Line 38: / Line 43: @@
   - Leave selection on “Beginner mode...” and hit Enter.
   - Choose the 3rd option “Restoredisk...” and hit Enter.
-  - Leave selection on “Dell_Optiplex...” as image to be restored and hit Enter.
+  - Leave selection on “Image_Name_You_Chose” as image to be restored and hit Enter.
-  - Leave selection on “sda_250GB_...” as the target and hit Enter.
+  - Leave selection on “sda_...” as the target and hit Enter.
   - Hit Enter again.
   - Hit “y” for yes and hit Enter.
@@ Line 48: / Line 53: @@
   - After machine power off removed USB Drive.
+:!: Restore must be done to a hard drive as large or larger than the original.
+:!: If the new larger hard drive does not appear to be able to expand to the correct size (stuck at original size) in disk manager shrink it by 10MB and the free space will appear.

Virtual Architects Support Wiki

User Tools

Site Tools

Differences

Page Tools