Virtual Architects Support Wiki

User Tools

Site Tools

You are here: start » computing » linux » ups » cyberpower
Trace:
computing:linux:ups:cyberpower

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
computing:linux:ups:cyberpower [2021/12/14 12:39]
gcooper old revision restored (2021/12/06 10:06) 		computing:linux:ups:cyberpower [2023/05/10 14:02] (current)
gcooper
Line 3: Line 3:
 http://www.cyberpowersystems.com http://www.cyberpowersystems.com
  
-===== CyberPower PowerPanel for Linux =====+===== PowerPanel Business 4 Linux =====
  
-:!: PowerPanel e-mail alerts use the ''mail'' command.  This will not work on XenServer and many other boxes, at least not without additional tweaking.  **Don't enable mail alerts without first dealing with the ''mail'' command.**+**Download**: https://www.cyberpowersystems.com/product/software/power-panel-business/powerpanel-business-4-7-0-linux/
  
-See also: **[[networking:linux:postfix_smarthost|Postfix Authenticated Smarthost]]** +**Manual**: https://dl4jz3rbrsfum.cloudfront.net/documents/CyberPower-UM-PPB-447.pdf
- +
-See also: **[[networking:linux:ssmtp|SSMTP]]**+
  
 ==== Installation ==== ==== Installation ====
  
-Connect the included USB cable to UPS.  You may have problems getting it to work with the serial cable.+:!: Tested with XCP-ng 8.2 and a CyberPower CPS1500AVR UPS.
  
-=== RPM ===+:!: Connect the included USB or serial cable to UPS.
  
-:!: Tested with SME Server 8 and a CyberPower CP900AVR UPS.+:!: We use the **Local** version for single servers with USB or serial cable connected UPSs.
  
 <file> <file>
-rpm -Uvh http://www.cyberpowersystems.com/software/powerpanel_123_i386.rpm+wget https://dl4jz3rbrsfum.cloudfront.net/software/ppb490-linux-x86_x64.sh 
 +chmod +x ppb470-linux-x86_x64.sh 
 +./ppb470-linux-x86_x64.sh
 </file> </file>
  
-=== Tar === +Check that services started:
- +
-:!: Tested with SME Server 7.3 and a CyberPower CP1500AVRT UPS. +
- +
-Download the PowerPanel software to the machine where the UPS is connected:+
  
 <file> <file>
-wget http://www.cyberpowersystems.com/software/powerpanel_1.2_i386.tar.gz+systemctl status ppbed.service 
 +systemctl status ppbwd.service
 </file> </file>
  
-Unpack and install:+==== Access ====
  
-<file> +Default credentials:
-tar -xzvf powerpanel-1.1.tar.gz +
-cd powerpanel-1.1 +
-./install.sh +
-</file>+
  
-==== Check Communications ====+^Username ^Password  ^ 
 +|admin    |admin     |
  
-<file> +Use a web browser from a workstation:
-pwrstat -status +
-pwrstat -config +
-</file>+
  
-Verify startup: +**http://ip.of.linux.svr:3052**
- +
-<file> +
-chkconfig --list |grep pwr +
-</file> +
- +
-For SME Server only which uses runlevel 7: +
- +
-<file> +
-ln -s /etc/rc.d/init.d/pwrstatd /etc/rc7.d/S93pwrstatd +
-</file>+
  
 ==== Configuration ==== ==== Configuration ====
computing/linux/ups/cyberpower.1639510761.txt.gz · Last modified: 2021/12/14 12:39 by gcooper

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki