User Tools

Site Tools


voice:phones:grandstream:grandstream_provisioning

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
voice:phones:grandstream:grandstream_provisioning [2015/08/23 16:28]
gcooper
voice:phones:grandstream:grandstream_provisioning [2022/02/21 10:44]
gcooper
Line 1: Line 1:
 ====== Grandstream Phone Provisioning Notes ====== ====== Grandstream Phone Provisioning Notes ======
  
-http://www.grandstream.com/index.php/support/tools+**Tools**: http://www.grandstream.com/index.php/support/tools
  
-===== GXV3275 =====+**P-Value Listing** (partial, version and phone dependent): http://www.voip-info.org/wiki/view/Grandstream+Configuration+Tool
  
-:!: Only the latest firmware 1.0.3.37 supports DHCP VLAN discovery.  You may need to manually configure the VLAN.+===== GXP2130 =====
  
-:!: The latest firmware 1.0.3.37 does not seem to be compatible with the current commercial FreePBX EPM.+==== Distinctive Ring ==== 
 + 
 +  * **On the PBX**, set a custom ''alert-info'' header on the **Inbound Route** 
 +    * **Alert-Info** to ''Custom'' 
 +    * **Custom Alert-Info** to ''custom-ring'' 
 +    * **Provisioning** 
 +      * ''P1488=custom-ring'' 
 +  * **On the phone**, under **Account -> Call Settings -> Match Incoming Caller ID** 
 +    * **Matching Rule** -> ''custom-ring'' 
 +    * **Ringtone** -> ''Custom Ringtone 3'' 
 +    * **Provisioning** 
 +      * ''P1489=3'' 
 + 
 +===== GXV3275 =====
  
 :!: Grandstream phones auto-reboot endlessly if they don't like the configuration files. :!: Grandstream phones auto-reboot endlessly if they don't like the configuration files.
  
-:!: Try performing a factory reset if you experience provisioning problems.+:!: Try performing a factory reset if you experience provisioning problems or follow the firmware update procedure: 
 + 
 +==== Firmware Update ==== 
 + 
 +  - Perform a factory reset 
 +  - Update the firmware (may take a while) 
 +  - **Troubleshooting**: Delete the provisioning template 
 +  - **Troubleshooting**: Create a new provisioning template 
 +  - Rebuild the config files 
 +  - Do another factory reset 
 + 
 +==== VLAN Configuration ==== 
 + 
 +You can use: 
 + 
 +  * **Provisioning** 
 +    * Config file 
 +      * Basefile edit 
 +    * ''P51=<vlid>'' 
 +      * VLAN Tag (Ethernet) 
 +    * ''P1685=1'' 
 +      * Default Transfer Mode to Attended 
 +  * **Manual** 
 +    * Web interface configuration 
 + 
 +:!: DHCP VLAN discovery does not seem to work but Option 66 does. 
 + 
 +    * DHCP Option 66 (''tftp-server-name''
 +    * DHCP Option 132 (''vlan-id''
 +    * Enable DHCP VLAN in config file (''P8300=1'', or ''P8038=1'' in older firmware) 
 + 
 +{{ :voice:phones:grandstream:freepbx_epm_basefile_gs.png?750 |}}
  
-:!: Perform a factory reset after any firmware update.+Here is an initial phone boot from the perspective of the PBX (TFTP server) with the **phone booting on data VLAN**.
  
-Here is an initial phone boot from the perspective of the PBX (TFTP server) with the **phone booting on data VLAN**.  The phone switches to voice VLAN because of the configuration file It then gets a new IP on the voice VLAN:+  * The phone switches to voice VLAN because of the configuration file 
 +  It then gets a new IP on the voice VLAN
  
 <file> <file>
voice/phones/grandstream/grandstream_provisioning.txt · Last modified: 2022/02/21 10:56 by gcooper